User manual NEFF W5440X0

[. . . ] Your washing machine Congratulations You have opted for a modern, high quality domestic appliance manufactured by Siemens. The washing machine is distinguished by its economical use of water and energy. Each appliance which leaves our factory is inspected thoroughly to ensure that it functions properly and is in perfect condition. For further information and a selection of our products go to our web site: http://www. siemen international. com or contact our customer service centres. Intended use J for use in the household only, J for the washing of machine washable textiles in a detergent solution, J to be operated with cold drinking water and commercially available detergents and care products which are suitable for use in washing machines. [. . . ] Comparable cleaning result with significantly lower energy consumption. - Meter detergent according to the manufacturer's instructions and water hardness. - If the washing is then dried in the tumble dryer, select spin speed according to the instructions of the dryer manufacturer. Information signals Emergency release, e. g. in the event of a power failure The programme continues to run when the power has been restored. However, if the laundry has to be removed, the washing machine door can be opened as follows: Risk of scalding. The detergent solution and laundry may be hot. Do not reach into the drum if it is still rotating. Do not open the washing machine door if water can be seen through the glass. - Set the programme selector to = Off and disconnect the mains plug. - Drain the detergent solution -> Page 10. - Pull the emergency release with a tool and release. The washing machine door can then be opened. Select M (Start/Pause) If the option buttons are touched for longer, the setting options run automatically!Å - 90º °C (Temp. ) Select the temperature (Å = cold) Select the spin speed (* depending on model) or D (Rinse hold = without final spin) Programme ends in . . . Programme progress displays: Washing, Rinse, Spin, End D - 1400* B (rpm. ) 1 - 24h W (Finish in) 2 . . . or terminate Washing Programmes with high temperature: - Cool washing: Select Rinse K. Programmes at lower temperature: - Select Spin B or b Empty . - Select M (Start/Pause). Set volume * direct 1 step to right Set volume * Set to d * If required, select repeatedly Status displays Q K B -0- 9000 339 465 Programme overview-> Pay attention to the Consumption values table on page 8 and the information on page 6. v (Intensive Wash), P (Prewash), (Less Ironing), K (Extra Rinse); reduced rinse and final spin cycle v (Intensive Wash), P (Prewash), K (Extra Rinse); only short spin, peg out dripping wet v (Intensive Wash), P (Prewash), (Less Ironing), K (Extra Rinse); only short spin between the rinse cycles Particularly gentle wash programme to avoid shrinkage, longer programme breaks (fabrics rest in the detergent solution) Short programme approx. 15 minutes, suitable for lightly soiled laundry v (Intensive Wash), (Less Ironing), K (Extra Rinse); reduced final spin at intervals 0108 Safety instructions - Read and follow the operating and installation instructions and all other information enclosed with the washing machine. Risk of electric shock - Never pull out the mains plug by tugging the power cord!- Never insert/pull out the mains plug with damp hands. Danger to life Redundant appliances: - Pull out the mains plug. - Sever the power cord and discard together with the plug. [. . . ] However, follow the instructions of the descaler manufacturer. Insert for liquid detergent depending on model Position insert for dispensing liquid detergent: - Completely remove the detergent drawer > Page 9. Do not use insert (push up): - for gelatinous detergents and washing powders; - for programmes with Prewash and W (Finish in) option. Filter in the water inlet hose Risk of electric shock!Do not immerse Aqua Stop safety device in water (contains electric valve). Siemens Electrogeräte GmbH Carl Wery Str. [. . . ]