User manual NETGEAR AGM733

[. . . ] Other brand and product names are registered trademarks or trademarks of their respective holders. Statement of Conditions In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes to the products described in this document without notice. NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein. Federal Communications Commission (FCC) Compliance Notice: Radio Frequency Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] Use the PDF of This Chapter link at the top left of any page. ­ ­ Click the PDF of This Chapter link at the top right of any page in the chapter you want to print. The PDF version of the chapter you were viewing opens in a browser window. Click the print icon in the upper left of the window. Tip: If your printer supports printing two pages on a single sheet of paper, you can save paper and printer toner by selecting this feature. Use the Complete PDF Manual link at the top left of any page. ­ ­ Click the Complete PDF Manual link at the top left of any page in the manual. The PDF version of the complete manual opens in a browser window. Click the print icon in the upper left of the window. Tip: If your printer supports printing two pages on a single sheet of paper, you can save paper and printer toner by selecting this feature. iv v1. 1, March 2007 AGM733 Wall-Plugged Ethernet Adapter User Guide Package Contents The product package should contain the following items: · One or twoAGM733 85 Mbps Wall-Plugged Ethernet Adapters, depending on whether you purhcased a single unit or a bundle. · AGM733 Resource CD, including: -- This guide. Check the status lights: · · · Power: The power LED turns solid green. If it does not, see "Troubleshooting" on page 13. HomePlug: The HomePlug LED blinks to indicate that the device is connected to the power line, and that no other PowerLine devices have been detected at this stage. Ethernet: The Ethernet LED blinks to indicate activity. If not, make sure that the Ethernet cable on the PowerLine adapter that you connected in the previous step is securely attached to the PowerLine adapter and the router, that the router is connected to the modem, and the router and modem are powered on. d. Make sure that the Internet port of your router is connected to your modem, and that your computer is either connected to a LAN port on the router or to a port on the PowerLine adapter. 5 v1. 1, March 2007 AGM733 Wall-Plugged Ethernet Adapter User Guide Connect other Ethernet PowerLine Adapters 1. Before plugging in your other PowerLine devices, take a note of the device password printed on the label on the back of each device. You will need this password later if you want to change the PowerLine network password. If you are adding more than one other PowerLine adapter, also note the MAC address given on the label, so that you will know which device the password is for. Plug your other PowerLine devices into power outlets in your home near to the other computers and peripherals to be included in your PowerLine local area network. Click Install Software, and the Welcome screen appears. Figure 1-7 3. [. . . ] Type the network password in the Private Network Password text box and click Set Local Device Only. Select the Main tab and check that the other devices in the PowerLine network appear in the device list. It may take a minute or two for all devices in the network to be detected. Adding a New Device from a Remotely Connected Computer 1. Note the device password given on the label on the back of the new PowerLine device. [. . . ]