User manual NETGEAR ELITE EVA9000

[. . . ] Install software on your computer with the NETGEAR Resource CD. Configure your media library to work with the Digital Entertainer Elite. 4. Install the two AA batteries into the remote control that shipped with the product. Setting Up the Digital Entertainer Elite To set up the Digital Entertainer Elite: 1. Turn on the TV. Set the video source selector on your TV to match the connection from your Digital Entertainer Elite. For example, if you used HDMI, set the TV to use Digital HD or HDMI input. [. . . ] 5. Follow the Setup Wizard steps to accept the licence and install the software. After the Setup Wizard steps are finished, click Configure to use the Configuration Wizard. S/PDIF coaxial (audio) MAC (wired) Scart HDMI Component video S/PDIF Coaxial Y Component Video Pb Pr USB port Ethernet port with LEDs Ethernet Speed Link/ACT Ethernet On/off Power switch SERIAL SERIAL FCC ID: PY306400058 IC ID: 4054A-06400058 MAC (wireless) N10947 MAC (wired) Scart HDMI S/PDIF Coaxial Y Component Video Pb Pr Digital Entertainer Elite EVA9000 FCC ID: PY306400058 IC ID: 4054A-06400058 S-Video CompositeVideo R Audio Out L S/PDIF Optical USB Speed Link/ACT Reset 100-240V 50-60Hz, 1. 2A max. U. S. Patent Nos. 4, 631, 603; 4, 819, 098; 4, 907, 093; 5, 315, 448; and 6, 516, 132 Power S-Video CompositeVideo R Audio Out L Digital Entertainer Elite EVA9000 S/PDIF Optical USB Reset 100-240V 50-60Hz, 1. 2A max. U. S. Patent Nos. 4, 631, 603; 4, 819, 098; 4, 907, 093; 5, 315, 448; and 6, 516, 132 Power SCART S-Video Composite Stereo video audio S/PDIF optical (audio) To connect the Digital Entertainer Elite: 1. Connect the Digital Entertainer Elite to your TV set and audio equipment. If you use a digital audio/visual (a/v) receiver, use an S/PDIF coaxial or optical cable to connect it. Connect the Digital Entertainer Elite to the router with an Ethernet cable. Configuring Your Media Library Use the Configuration Wizard to set up your media library to work with the Digital Entertainer Elite. The Configuration Wizard prompts you to select media folders to be shared. This will allow the Digital Entertainer Elite to access these files. Browse and select the folders that you want, and then click Next. The Configuration Wizard is ready to configure your Digital Entertainer Elite and displays this screen: 3. For some firewalls, specific ports must be opened so that the Digital Entertainer Elite can access media files on your computer. If prompted, select Allow or Unblock to allow the access. Click Next, and follow the onscreen instructions to select your media folders. When you are finished, go to your TV. Installing an Internal Disk Drive (Optional) The EVA9150 comes with a pre-installed hard disk drive, which is ready to use out of the box. To install an optional disk drive on either Digital Entertainer Elite model, carefully follow these instructions. Warning: The installation process formats the hard drive and erases all existing data. Before you begin, back up any existing data, if necessary. For the EVA9150 only, remove the preinstalled hard disk from the tray, remove the four screws that secure it, and put the justremoved hard disk in a safe place. Position the drive with the bottom facing out from the tray, and the connectors facing away. [. . . ] 5. Your Digital Entertainer Elite is ready to use. For more information about using the Digital Entertainer Elite, a User Manual is provided on your NETGEAR Resource CD, or download the latest documentation at http:// www. NETGEAR. com/support. 6. Safety Information Please read and follow this important information, especially those instructions related to the risk of electric shock or injury to persons. Warning: To reduce the risk of electric shock, do not remove the cover. There are no user serviceable parts inside. This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste Electrical and Electronic Equipment (the WEEE Directive). [. . . ]