User manual NETGEAR EVA700 INSTALLATION GUIDE

[. . . ] 3. Connect the digital entertainer to your television set and audio equipment. If you use a digital a/v receiver, use S/PDIF coaxial cable to connect it. Connect the digital entertainer to the router with an Ethernet cable. Connect the digital entertainer power cord and plug it into an outlet. [. . . ] Aim the remote control at the digital entertainer. Use the remote control to select the onscreen option to allow the digital entertainer to use Windows Media Connect. Note: If you cannot see the menu on the television, the remote control may be set with the wrong TV mode for your television. To fix this problem, push TV Mode on the remote control. You can cycle through each TV mode to find and select the correct one 4. Use the remote control to select the desired media. 7. Select No. The television displays network information. If there is a problem see the Troubleshooting Tips on this card, or the Digital Entertainer Model EVA700 User Manual. Installing the Software After you have connected the digital entertainer, follow these steps to install the software. Power on your computer and log in as needed. Insert the NETGEAR CD into the CD drive on the computer. The main CD page opens. For troubleshooting tips, see the Digital Entertainer Model EVA700 User Manual. Intel® ViivTM Technology To use these instructions, you must have an Intel® ViivTM technology-based PC featuring the Intel® ViivTM logo below. Otherwise, use the instructions on the other side of this card or in the Digital Entertainer Model EVA700 User Manual. Wired Ethernet Cable Setup 1. Select connecting it to the router with an Ethernet network cable, and then next. Go to your digital entertainer, and make the audio and/or video connections according to the Installing the Digital Entertainer instructions on the other side of this document. Power on the digital entertainer and go back to your PC. Follow the on-screen instructions to continue adding your device to the network and setting up your Intel® ViivTM Media Library. Completing your wireless setup if you do not have an Intel® ViivTM technology verified router Intel® ViivTM technology verified routers have this logo on them: Your device has been designed to work with Intel Viiv technology-based PCs, to help you add this device to your network and enjoy content from your PC. To enjoy these features, you may need to update the Intel Viiv software on your PC. Congratulations!Your device is set up! Wireless Setup 1. Note: If the Intel® ViivTM software does not find an Intel® ViivTM technology verified router skip to the Completing your wireless setup if you do not have an Intel® ViivTM technology verified router section. Go to your digital entertainer, and make the audio and/or video connections according to the Installing the Digital Entertainer instructions on the other side of this document. Power on the digital entertainer and choose the Intel® ViivTM technology-based PC setup option. Go back to your PC and enter the passcode. [. . . ] If you are setting up your device by connecting it to your router with an Ethernet network cable, go to the Wired Ethernet Cable Setup section. If you are setting up your device with a wireless connection, go to the Wireless setup section. Note: You may navigate to the Intel® ViivTM settings window either by selecting the Intel® ViivTM logo on your desktop or system tray. The logo can also be found in the More Programs area in Windows* XP Media Center Edition 2005. . or Technical Support Thank you for selecting NETGEAR products. After completing the installation, register your product at http://www. NETGEAR. com/register. [. . . ]