User manual NETGEAR FA311 INSTALLATION GUIDE

[. . . ] YOU MUST REGISTER TO OBTAIN TECHNICAL SUPPORT. PLEASE RETAIN PROOF OF PURCHASE and this warranty information. To register your product, get product support, or to obtain product information and NETGEAR product documentation, direct your Web browser to the http://www. NETGEAR. com Web page. M - F AP A TERS HU B PC with network card installed Power adapter PC with network card installed Printer (optional) 10. "NETGEAR FA330/FA331 PCI Adapter" will appear in the model list. [. . . ] Following the steps to check if the driver is well installed. · GearBox for Adapters CD · FA311/FA312/FA331 Installation Guide For FA331 Adapters: 2 CONNECT NETGEAR TO YOUR ENVIRONMENT Install the Card Note: Touch a grounded metal object to free yourself of static electricity before you handle the card. Turn the power off and unplug the power cord from your computer. Choose an available PCI slot and remove the corresponding back plate from the PC chassis. Insert the card into the PCI expansion slot. Caution: To avoid damaging any components on the card, handle it by the edges, using your thumbs to push it securely into the PCI slot. Make sure the card is fully inserted into the slot to prevent the PC operating system from freezing at startup. Network card 1. Turn on the power to the computer and start Windows XP . Double-click "My Computer" on the desktop, double-click "Control panel" and then double-click "System". Click "Hardware" and click "Device Manager" tab, then double-click "Network adapters". When Select Network Adapter box opens, click "Have Disk" then click "Next". Back plate removed 3. The install hardware device drivers dialog box will appear. Select "Search for a suitable driver for your device (Recommended)". When the following dialog box opens, select "Specify the location of the driver (Advanced)". Click "Next". 4 TEST YOUR NETWORK CONNECTION To verify your installation (this example uses Windows XP, but the process is similar for the other Windows OS): 1. Double-click "My Computer" on the desktop, click "Control Panel", and then double-click "System". © 2002 by NETGEAR, Inc. Trademarks NETGEAR® is a registered trademark of NETGEAR, INC. in the United States and in other countries. Microsoft® Windows® and Windows® logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or the other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice. Statement of Conditions In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes to the products described in this document without notice. NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein. 4. [. . . ] When Windows returns its search results in the following dialog box, click "Next" to start install the FA311/FA312/FA331 adapter driver. If there is a problem with the installation of the driver, an exclamation point will appear next to the "NETGEAR FA311/FA312 Fast Ethernet Adapter (or FA330/FA331 PCI Adapter)". If the problem persists, call 1-888-NETGEAR for technical support. TECHNICAL SPECIFICATIONS Properties: Standards Compatibility FA311/FA312/FA331 Fast Ethernet PCI Adapter: IEEE 802. 3u Fast Ethernet IEEE 802. 3 Ethernet IEEE 802. 3u Auto Negotiation Auto-Sensing PCI Plug and Play 2. 1 or 2. 2 Compatible RJ-45 connector 3 W max. +5 +/- 5% @ 630 mA maximum EN 55 022 Statement This is to certify that the Model FA311/FA312/FA331 Network Card are shielded against the generation of radio interference in accordance with the application of Council Directive 89/336/EEC, Article 4a. Conformity is declared by the application of EN 55 022 Class B (CISPR 22). [. . . ]