User manual NETGEAR FA510 INSTALLATION GUIDE

[. . . ] Using a UTP cable, connect any port on the hub to the port on the RJ45 adapter cable. To connect the network cables, follow the illustration below. Note: One of the ports on NETGEAR hubs is switchable between Normal (MDI-X) and Uplink (MDI) with a Normal/Uplink push button. If you are using this switchable port on a NETGEAR hub to connect to a PC or the network card, make sure the Normal/Uplink push button is set to Normal. PC with network card installed Power adapter Notebook PC RJ-45 connectors Hub Model FA510 Network Card with RJ-45 adapter cable Category 5 10/100 Mbps UTP cables* *Use the cable provided or any Category 5 UTP cable. [. . . ] The updated driver (Recommended) NETGEAR FA510 Fast Ethernet CardBus Card One of the other drivers View List. . . < Back Next> Cancel Click on "The updated driver. . . . " and click on "Next. " 6. Add New Hardware Wizard Windows driver file search for the device: NETGEAR FA510 Fast Ethernet CardBus Card Windows is now ready to install the best driver for this device. Click Back to select a different driver, or click Next to continue. Location of driver: A:\NETFA510. INF < Back Next> Cancel Make sure that the location and the correct driver are displayed (for example, A:\NETFA510. INF). Click on "Next. " 7. Insert Disk Please insert the the disk labeled 'NETGEAR FA510 Fast Ethernet CardBus Card Drivers Disk' and click OK. OK Click on "OK. " Model FA510 Network Card Installation Guide 8. Copying Files. . . The file 'NDIS2DOS\FA510. DOS' on NETGEAR FA510 Fast Ethernet CardBus Card Drivers disk cannot be found. Insert NETGEAR FA510 Fast Ethernet CardBus Card Drivers disk in the selected drive, and click OK. OK Cancel Skip File Copy files from: A:\ Details. . . Browse. . . Insert the Drivers and Diagnostics Disk and click on "OK. " Note: If you copied the Windows 98 CD-ROM to your hard drive, the next two screens may not appear. 9. Insert Disk Please insert the the disk labeled 'Windows 98 CD-ROM' and then click OK. OK Click on "OK. " 10. Copying Files. . . The file 'choosusr. dll' on Windows 98 CD-ROM could not be found. Insert Windows 98 CD-ROM into the drive selected below, and click OK. OK Cancel Skip File Copy files from: D:\WIN98 Details. . . Browse. . . Insert the Windows 98 CD-ROM. Make sure the designated path to the Windows 98 CD-ROM is displayed in the "copy files from" prompt line (for example, D:\WIN98). Click on "OK. " Model FA510 Network Card Installation Guide 11. Update Device Driver Wizard NETGEAR FA510 Fast Ethernet CardBus Card Windows has finished installing the software that your new hardware device requires. < Back Finish Cancel Click on "Finish. " 12. Network ? To finish setting up your new hardware, you must restart your computer. Do you want to resatrt your computer now?Yes No Be sure to remove the Drivers and Diagnostics Disk and the Windows 98 CD-ROM before restarting your computer. Click on "Yes" to restart your computer. Proceed to "Verify Installation. " Model FA510 Network Card Installation Guide Verify Installation 1. Double-click on "My Computer" on your desktop, double-click on "Control Panel, " and then double-click on "System. " 2. Click on "Device Manager. " Model FA510 Network Card Installation Guide 3. Double-click on "Network adapters" and then double-click on "NETGEAR FA510 Fast Ethernet CardBus Card. " If there is a problem with the installation of the driver, an exclamation point appears next to "NETGEAR FA510 Fast Ethernet PCI Adapter. " If there is an exclamation point, double-click on "NETGEAR FA510 Fast Ethernet PCI Adapter. " Model FA510 Network Card Installation Guide 4. The "Properties" window opens, and a message regarding the status of the device is displayed in the window. Continue to click on "OK" or click on the "X" in the right-hand corner to close any open windows and return to the Windows 98 desktop. Model FA510 Network Card Installation Guide Technical Specifications Model FA510 Network Card Standards Compatibility NetWare tested and approved Microsoft® Windows 95, Windows 98, Windows NT® compatible IEEE 802. 3i, 10BASE-T Ethernet IEEE 802. 3u 100BASE-TX Fast Ethernet RJ-45 connector Assigned by Plug-and-Play system 2. 0 W 3. 37 by 2. 13 in. 8. 56 by 5. 40 cm 0. 14 lb (63 g) Interface Options IRQ Options Power Consumption Physical Specifications Dimensions Weight Environmental Specifications Operating temperature Operating humidity Agency Compliance 0° to 45° C 10% to 90% noncondensing CE mark, commercial FCC, Part 15, Class B EN 55 022 (CISPR 22), Class B Canada ICES-003, Class B VCCI Class B Model FA510 Network Card Installation Guide © 2000 by NETGEAR, Inc. Trademarks NETGEARTM is a trademark of NETGEAR, Inc. Windows®is a registered trademark of Microsoft Corporation. [. . . ] FOR HOME OR OFFICE USE Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ]