User manual NETGEAR FR114W Reference Guide

[. . . ] Reference Manual for the Model FR114P, FR114W and FM114P Cable/DSL ProSafe Firewall Family NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA Phone 1-888-NETGEAR SM-FM114PNA-0 May 2002 © 2002 by NETGEAR, Inc. All rights reserved. Trademarks NETGEAR and Auto Uplink are trademarks or registered trademarks of Netgear, Inc. Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation. [. . . ] To configure your NT 4. 0 Server for LPD printing, follow this procedure: 1. 9. Go to Start->Settings->Printers and launch the Add Printer wizard. When prompted with `This printer will be managed by. . ', select My Computer and click Next. Select Add Port, then select LPR Port and click New Port. In the Dialog requesting `Name or Address of server providing lpd', enter the IP address of the FR114P Firewall. For Name of printer or print queue on that server, enter L1. When returned to the Printer Ports window, select Close and then install your printer driver as usual. When prompted about Sharing, select the Sharing button. In the Shared dialog box, enter the shared printer name. The shared name is how other users will see this printer. You should advise client PCs of the Server name and this printer name. Click OK to save and exit. Windows 2000 Server Configuration The LPD/LPR Port is not enabled by default. To enable it, use this procedure: 1. In Control Panel, select Add/Remove Programs, then Windows Components. Print Server 7-5 Reference Manual for the Model FR114P, FR114W and FM114P Cable/DSL ProSafe Firewall 2. Select Other Network File and Print Services, then click the Details button. 3. 4. Enable Print Services for Unix, then click OK. Click Next and complete the Wizard. Adding the Printer: 1. 2. Open your Printers folder, and start the Add Printer Wizard. When prompted, select Local Printer. 7-6 Print Server Reference Manual for the Model FR114P, FR114W and FM114P Cable/DSL ProSafe Firewall 3. In the Select the Printer Port screen, select LPR Port, as shown below. 7. In the Dialog requesting `Name or Address of server providing lpd', enter the IP address of the FR114P Firewall. For Name of printer or print queue on that server, enter L1. Click OK, then Next, and continue the Wizard. At the Select Sharing screen, select the button for Share As, and enter the shared printer name. The shared name is how other users will see this printer. [. . . ] A technique by which several hosts share a single IP address for access to the Internet. A block of information sent over a network. A packet typically contains a source and destination network address, some protocol and length information, a block of data, and a checksum. PPP over Ethernet is a protocol for connecting remote hosts to the Internet over an always-on connection by simulating a dial-up connection. [. . . ]