User manual NETGEAR FS752TS HW INSTALLATION GUIDE

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual NETGEAR FS752TS HW. We hope that this NETGEAR FS752TS HW user guide will be useful to you.

Lastmanuals help download the user guide NETGEAR FS752TS HW.

Download

Manual abstract: user guide NETGEAR FS752TS HWINSTALLATION GUIDE

Detailed instructions for use are in the User's Guide.

 [. . . ] Hardware Installation Guide for the Prosafe Stackable Smart Switch FS700TS Series

NETGEAR,  Inc. 4500 Great America Parkway Santa Clara,  CA 95054 USA Phone 1-888-NETGEAR

202-10150-01 December 2005

© 2005 by NETGEAR,  Inc. December 2005. 

Trademarks
@2005 NETGEAR,  Inc. NETGEAR,  the Netgear logo,  Prosafe,  The Gear Guy and Everybody's connecting are trademarks of Netgear,  Inc.  [. . . ] 2 Gigabit Interface Converter SFP slots for SFP modules (ports 49F and 50F) 13. 4 RJ-45 connectors for 10BASE-T,  100BASE-TX and 1000BASE-T (ports 49T,  50T,  51,  and 52) 14. Factory Defaults button

Introduction v1. 0,  December 2005

2-9

Hardware Installation Guide for the Prosafe Stackable Smart Switch FS700TS Series

LED Designations
Port LEDs The following table describes the port LED designations. PORT LEDs on Non-PoE Devices
Port 24/48 10/100M Ports--One LED/Port LED Link/ACT/SPD LED Designation Off : No 10/100Mbps link is established on the port. Solid Green: A valid 100Mbps link is established on the port. Flashing Green: Packet transmission or reception is occurring on the port at 100Mbps. Solid Yellow: A valid 10Mbps link is established on the port. Flashing Yellow: Packet transmission or reception is occurring on the port at 10Mbps. Off : No 10/100/1000Mbps link is established on the port. Solid Green: A valid 1000Mbps link is established on the port. Solid Yellow: A valid 10/100Mbps link is established on the port. Flashing Green: Packet transmission or reception is occurring on the port at 1000Mbps. Flashing Yellow: Packet transmission or reception is occurring on the port at 10/100Mbps. Green: Stack port has a valid link connection. Off: Stack port does not have a valid link connection. 

4 Gigabit Copper Ports-- Two LED's/Port on Jack

Left LED Link/ACT/ SPD LED:

Right LED Stack LED (Combo port group/Copper port group): 2 SFP Ports--One LED/Port SFP Link/ACT LED

Off: No link is established on the port. Solid Green: A valid link is established on the port. Flashing Green: Packet transmission or reception is occurring on the port. 

2-10 v1. 0,  December 2005

Introduction

Hardware Installation Guide for the Prosafe Stackable Smart Switch FS700TS Series

Table 2-2. Port LEDS on PoE Devices
Port 48 10/100M Ports--One LED/Port (Ethernet Mode) LED Link/ACT/SPD LED Designation Off: No 10/100Mbps link is established on the port. Solid Green: A valid 100Mbps link is established on the port. Flashing Green: Packet transmission or reception is occurring on the port at 100Mbps. Solid Yellow: A valid 10Mbps link is established on the port. Flashing Yellow: Packet transmission or reception is occurring on the port at 10Mbps.  [. . . ] Topics include the following: · Troubleshooting chart · Additional troubleshooting suggestions

Troubleshooting Chart
The following table lists symptoms,  causes,  and solutions of possible problems. 
Table 4-1. Troubleshooting Chart
Symptom Power LED is off. Solution Check the power cord connections for the switch at the switch and the connected device. Ensure all cables used are correct and comply with Ethernet specifications.  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE NETGEAR FS752TS HW

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual NETGEAR FS752TS HW will begin.