User manual NETGEAR FSM 7300S SOFTWARE MANUAL

[. . . ] User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 202-10088-01 March 2005 202-10088-01, March 2005 © 2005 by NETGEAR, Inc. , March 2005. FullManual All rights reserved. Technical Support Please register to obtain technical support. Please retain your proof of purchase and warranty information. [. . . ] RST BPDUs Transmitted Rapid Spanning Tree Protocol Bridge Protocol Data Units sent RST BPDUs Received Rapid Spanning Tree Protocol Bridge Protocol Data Units received. 8-128 202-10088-01, March 2005 Switching Commands User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software MSTP BPDUs Transmitted Multiple Spanning Tree Protocol Bridge Protocol Data Units sent MSTP BPDUs Received Multiple Spanning Tree Protocol Bridge Protocol Data Units received. show spanning-tree mst detailed This command displays settings and parameters for the specified multiple spanning tree instance. The instance <mstid> is a number that corresponds to the desired existing multiple spanning tree instance ID. Format Modes MST Instance ID MST Bridge Priority show spanning-tree mst detailed <mstid> Privileged EXEC User EXEC The ID of the MST being created. The bridge priority for the MST instance selected. Time Since Topology Change The time in seconds since the topology changed. Topology Change Count Number of times the topology has changed for this multiple spanning tree instance. Topology Change in Progress Value of the Topology Change parameter for the multiple spanning tree instance. Designated Root Identifier of the Regional Root for this multiple spanning tree instance. Root Path Cost Path Cost to the Designated Root for this multiple spanning tree instance. Root Port Identifier Port to access the Designated Root for this multiple spanning tree instance. Associated FIDs List of forwarding database identifiers associated with this instance. Associated VLANs List of VLAN IDs associated with this instance. show spanning-tree mst port detailed This command displays the detailed settings and parameters for a specific switch port within a particular multiple spanning tree instance. The instance <mstid> is a number that corresponds to the desired existing multiple spanning tree instance. The <slot/port> is the desired switch port. Format Mode MST Instance ID Port Identifier Switching Commands 202-10088-01, March 2005 show spanning-tree mst port detailed <mstid> <slot/ port> Privileged EXEC and User EXEC The ID of the MST instance. The port identifier for the specified port within the spanning tree. 8-129 User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software Port Priority Port Forwarding State Port Role Port Path Cost Designated Root The priority for a particular port within the selected MST instance. Current spanning tree state of this port Each MST Bridge Port that is enabled is assigned a Port Role for each spanning tree. Configured value of the Internal Port Path Cost parameter The Identifier of the designated root for this port. Designated Port Cost Path Cost offered to the LAN by the Designated Port Designated Bridge Bridge Identifier of the bridge with the Designated Port. Designated Port Identifier Port on the Designated Bridge that offers the lowest cost to the LAN. If 0 (defined as the default CIST ID) is passed as the <mstid>, then this command displays the settings and parameters for a specific switch port within the common and internal spanning tree. The <slot/port> is the desired switch port. In this case, the following are displayed. Port Identifier Port Priority Port Forwarding State Port Role Port Path Cost Designated Root Designated Port Cost Designated Bridge The port identifier for this port within the CST. The priority of the port within the CST. The forwarding state of the port within the CST. The role of the specified interface within the CST. The configured path cost for the specified interface. Identifier of the designated root for this port within the CST. [. . . ] TLS and SSL are not interoperable. Telnet A TCP/IP application protocol that provides a virtual terminal service, allowing a user to log into another computer system and access a device as if the user were connected directly to the device. Traffic prioritization Giving time-critical data traffic a higher quality of service over other, non-critical data traffic. Trivial File Transfer Protocol TFTP is a simple form of the File Transfer Protocol (FTP). TFTP uses the User Datagram Protocol (UDP, a direct protocol used to communicate datagrams over a network with little error recovery) and provides no security features. It is often used by servers to boot diskless workstations, X-terminals, and routers. Trunking The process of combing a set of trunks that are traffic-engineered as a unit for the establishment of connections between switching systems in which all of the communications paths are interchangeable. U UTP Unshielded twisted pair is the cable used by 10BASE-T and 100BASE-Tx Ethernet networks. V Virtual Local Area Network Operating at the Data Link Layer (Layer 2 of the OSI model), the VLAN is a means of parsing a single network into logical user groups or organizations, as if they physically resided on a dedicated LAN segment of their own. In reality, this virtually defined community may have individual members peppered across a large, extended LAN. [. . . ]