User manual NETGEAR FSM7326P

[. . . ] Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches, Software Version 4. 0 NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA Beta Draft 1 March 2006 © 2006 by NETGEAR, Inc. FullManual. Trademarks NETGEAR and Auto Uplink are trademarks or registered trademarks of NETGEAR, Inc. . Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation. [. . . ] The option all sets every configured port-channel with the same administrative mode setting. Default Format Mode enabled port-channel linktrap {<logical unit/slot/port> | all} Global Config 12. 1. 11. 1 no port-channel linktrap This command disables link trap notifications for the port-channel (LAG). The interface is a logical slot and port for a configured port-channel. The option all sets every configured port-channel with the same administrative mode setting. Format Mode no port-channel linktrap {<logical unit/slot/port> | all} Global Config Port-Channel/LAG (802. 3ad) Commands v1. 0, March 2006 12-5 Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches, 12. 2 Port-Channel Show Commands This section describes the commands you use to view port-channel status and configuration information. 12. 2. 1 show port-channel brief This command displays the static capability of all port-channels (LAGs) on the device as well as a summary of individual port-channels. Format Modes Static Capability show port-channel brief Privileged EXEC User EXEC This field displays whether or not the device has static capability enabled. This field displays the name of the port-channel. This field indicates whether the link is up or down. This field lists the ports that are members of this port-channel, in <unit/slot/port> notation. This field lists the ports that are actively participating in this port-channel. For each port-channel the following information is displayed: Name Link State Mbr Ports Active Ports 12. 2. 2 show port-channel This command displays an overview of all port-channels (LAGs) on the switch. Format Modes Logical Interface Port-Channel Name Link State Admin Mode show port-channel {<logical unit/slot/port> | all} Privileged EXEC User EXEC Valid slot and port number separated by forward slashes. You may enter any string of up to 15 alphanumeric characters. Indicates whether the Link is up or down. The factory default is enabled. 12-6 Port-Channel/LAG (802. 3ad) Commands v1. 0, March 2006 Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches, Link Trap Mode STP Mode This object determines whether or not to send a trap when link status changes. The Spanning Tree Protocol Administrative Mode associated with the port or port-channel (LAG). The possible values are: Disable - Spanning tree is disabled for this port. Enable - Spanning tree is enabled for this port. A listing of the ports that are members of this port-channel (LAG), in unit/slot/port notation. There can be a maximum of eight ports assigned to a given port-channel (LAG). This field displays the status designating whether a particular port-channel (LAG) is statically or dynamically maintained. Static - The port-channel is statically maintained. Dynamic - The port-channel is dynamically maintained. [. . . ] You should use scripts on systems with default configuration; however, you are not prevented from applying scripts on systems with non-default configurations. Scripts must conform to the following rules: · · · · · Script files are not distributed across the stack, and only live in the unit that is the master unit at the time of the file download. The file extension must be ". scr". A maximum of ten scripts are allowed on the switch. [. . . ]