User manual NETGEAR FVS318N

[. . . ] Technical Support Please refer to the support information card that shipped with your product. Com/register, we can provide you with faster expert technical support and timely notices of product and software upgrades. Support Information Phone: 1-888-NETGEAR, for US & Canada only. For other countries, see your Support information card. [. . . ] 1, August 2010 5-11 ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual Within 30 seconds you should receive the message “Successfully connected to My Connections\gw1”. Figure 5-13 The VPN client icon in the system tray should state On: 2. To view more detailed additional status and troubleshooting information from the NETGEAR VPN client, follow these steps. €¢ Right-click the VPN Client icon in the system tray and select Log Viewer. Figure 5-14 Note: The information in the Log Viewer screen in Figure 5-14 does not correspond to the configuration that is presented in the “Use the NETGEAR VPN Client Security Policy Editor to Create a Secure Connection” on page 5-7. 1, August 2010 Virtual Private Networking ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual • Right-click the VPN Client icon in the system tray and select Connection Monitor. Figure 5-15 Note: The information in the Connection Monitor screen in Figure 5-15 does not correspond to the configuration that is presented in the “Use the NETGEAR VPN Client Security Policy Editor to Create a Secure Connection” on page 5-7. The VPN client system tray icon provides a variety of status indications, which are listed below. The client policy is deactivated but not connected. 1, August 2010 5-13 ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual VPN Firewall VPN Connection Status and Logs To view VPN firewall VPN connection status, select VPN from the main menu and Connection Status from the submenu. the VPN Connection Status screen displays. Figure 5-16 Note: The information in the VPN Connection Status screen in Figure 5-16 does not correspond to the example configurations that are presented in this chapter. You can set a Poll Interval (in seconds) to check the connection status of all active IKE policies to obtain the latest VPN tunnel activity. The Active IPSec SA(s) table also lists current data for each active IPsec SA (security association): • • • • • • Policy Name. The name of the VPN policy associated with this SA. The IP address on the remote VPN endpoint. The amount of data transmitted over this SA. The number of packets transmitted over this SA. Allows you to terminate or build the SA (connection), if required. 1, August 2010 Virtual Private Networking ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual To view VPN firewall VPN logs, select Monitoring from the main menu and VPN Logs from the submenu. Figure 5-17 Managing VPN Policies When you use the VPN Wizard to set up a VPN tunnel, both a VPN policy and an IKE policy are established and populated in both policy tables. The name you selected as the VPN tunnel connection name during Wizard setup identifies both the VPN policy and IKE policy. [. . . ] 1, August 2010 B-3 ProSafe Gigabit 8 Port VPN Firewall FVS318G Reference Manual Note: The one-time passcode is time synchronized to the authentication server so that the OTP can only be used once and must be used before the expiration time. If a user does not use this passcode before it is expired, the user must go through the request process again to generate a new OTP. The user then proceeds to the Two-Factor Authentication login page and enters the generated one-time passcode as the login password. 1, August 2010 Two Factor Authentication Appendix C Related Documents This appendix provides links to reference documents you can use to gain a more complete understanding of the technologies used in your NETGEAR product. [. . . ]