User manual NETGEAR GS116E

[. . . ] If you don’t have everything listed above, see the support information card for contact information. If you’re missing the support information card itself, get contact information at www. 2 Prepare to Install the Switch Decide where you want to place the switch. [. . . ] If the socket is controlled by a light switch, make sure the switch is in the on position. Make sure you are using the NETGEAR power adapter supplied with your switch. server with GA622T Adapter DSL modem • LOCAL 10/100M 10/100/1000 Mbps Gigabit Switch GS116 8 7 6 5 4 3 2 1 INTERNET 12VDC 1. 2A OFF ON PWR Auto Uplink 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 GS116 16-port 10/100/1000 Mbps Gigabit Switch Model FVS318 Cable/DSL ProSafe VPN Firewall The Port number light is not lit for a connected device or stays on continuously There’s a hardware connection problem. €¢ • • • Make sure the cable connectors are securely plugged in at the switch and the device. Make sure the connected device is turned on. If the Ethernet cable is connected to a NIC or other Ethernet adapter, make sure the card or adapter is installed correctly and is working. Make sure the cable is less than 328 feet (100 meters). Place the switch on a flat surface or hook onto the screws. For each device, insert one end of an Ethernet cable into the port in the device and insert the other end into one of the Ethernet ports on the switch. Connect the power adapter’s cord into the back of the switch and then plug the adapter into a power source (such as a wall socket or power strip). 9 kg (2 lbs) 0 to 40° C (32 to 104° F) 10% t0 90% relative humidity, non-condensing CE mark, Commercial FCC Part 15, Class A EN 55 022 (CISPR 22), C-Tick CE mark, Commercial UL listed (UL 1950), C-Tick Statement of Conditions In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes to the product described in this document without notice. NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein. Certificate of the Manufacturer/Importer It is hereby certified that the NETGEAR Model GS116 Gigabit Ethernet Switch has been suppressed in accordance with the conditions set out in the BMPT-AmtsblVfg 243/1991 and Vfg 46/1992. [. . . ] conformity is declared by the application of EN 55 022 Class A (CISPR 22). Canadian Department of Communications Radio Interference Regulations This digital apparatus (NETGEAR Model GS116 Gigabit Ethernet Switch) does not exceed the Class A limits for radio-noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications. Com/register, we can provide you with faster expert technical support and timely notices of product and software upgrades. [. . . ]