User manual NETGEAR GS724TPS

[. . . ] GS700TPS Smart Switch Software Administration Manual NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134 USA June 2009 202-10489-01 © 2009 by NETGEAR, Inc. All Rights reserved Trademarks NETGEAR and the NETGEAR logo are registered trademarks of NETGEAR, Inc. in the United States and/or other countries. [. . . ] If the time since the last MAC Address with telephony MAC Address was aged out exceeds the Voice VLAN aging time, the port is dropped from the Voice VLAN. The Voice VLAN aging time starts after the MAC Address is aged out from the Dynamic MAC Address table. The MAC Address dynamic aging default time is 300 sec. For more information on defining MAC address age out time, see "Dynamic Addresses". 2. Select the device VoiceVLAN Status in the provided field. If you selected Enable in the VoiceVLAN Status field, select the VoiceVLAN ID, Class of Service, Remark CoS and enter the Voice VLAN Aging Time in the provided fields. Click APPLY to update the device. Port Setting The Voice VLAN Port Setting screen allows network managers to add ports or LAGs to the Voice VLAN. To add ports or LAGs to the Voice VLAN: 1. Click Switching > Voice VLAN > Advanced > Port Setting. The Voice VLAN Port Setting screen opens: 4-25 v1. 0, June 2009 Configuring Switching Settings GS700TPS Smart Switch Software Administration Manual Figure 4-18 The Voice VLAN Port Setting screen contains the following fields: · · Interface ­ Displays the interface for which the Voice VLAN settings are applied. Voice VLAN Mode ­ Select the Voice VLAN mode. The possible field values are: ­ ­ None ­ Maintains the current Voice VLAN port/LAG settings. Auto ­ Enables the port/LAG to join the Voice VLAN if traffic with an IP Phone MAC Address is transmitted on the port/LAG. The port/LAG is aged out of the Voice VLAN if the IP phone's MAC address (with an OUI prefix) is aged out and exceeds the defined aging time. If the MAC Address of the IP phones OUI was added manually to a port/LAG in the Voice VLAN, the user cannot add it to the Voice VLAN in Auto mode, only in Manual mode. · Voice VLAN Security ­ Select the port/LAG security mode on the Voice VLAN. Port Security ensures that packets arriving with an unrecognized OUI are dropped. ­ Enable ­ Enables port/LAG security on the Voice VLAN. Configuring Switching Settings v1. 0, June 2009 4-26 GS700TPS Smart Switch Software Administration Manual ­ · Disable ­ Disables port/LAG security on the Voice VLAN. This is the default value. Membership ­ Displays the Voice VLAN member status. The possible field values are: ­ ­ Active ­ Indicates the Voice VLAN membership is active for the interface. Not Active ­ Indicates the Voice VLAN membership is not active for the interface. 2. Select the Voice VLAN Mode, Voice VLAN Security and Membership in the provided fields in the first row. Click APPLY to update the device. OUI The OUI screen lists the Organizationally Unique Identifiers (OUIs) associated with the Voice VLAN. [. . . ] Cable testing provides information about where errors occurred in the cable, the last time a cable test was performed, and the type of cable error that occurred. The tests use Time Domain Reflectometry (TDR) technology to test the quality and characteristics of a copper cable attached to a port. Cables up to 120 meters long can be tested. Cables are tested when the ports are in the down state, with the exception of the Approximated Cable Length test. 8-7 v1. 0, June 2009 Maintenance GS700TPS Smart Switch Software Administration Manual To test cables: 1. [. . . ]