Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual NETGEAR GSM7000. We hope that this NETGEAR GSM7000 user guide will be useful to you.
Lastmanuals help download the user guide NETGEAR GSM7000.
Detailed instructions for use are in the User's Guide.
[. . . ] ·
Installing the Switch in a Rack: Use the rack-mount kit supplied with your switch.
Macintosh users can use ZTerm. UNIX users can use a terminal emulator like TIP.
7000 Series Managed Switch
c. Apply AC Power When you apply power, the Power LED on the switch's front panel will be Yellow, as it conducts a Power On Self Test (POST). [. . . ] To connect a console to the switch: Using the null-modem cable supplied with the switch, connect a VT100/ANSI terminal or a workstation to the switch port labeled Console. If you attached a PC, Apple Macintosh, or UNIX workstation, start a terminal-emulation program: Windows users can use HyperTerminal.
If any item is missing or damaged, contact your place of purchase immediately.
2
SET UP THE SWITCH
a. Prepare the site so that the mounting, access, power source, and environmental requirements identified in the Hardware Installation Guide published on the CD-ROM are met. · Installing the Switch on a Flat Surface: Stick one of the rubber footpads that came with the switch on each of the four concave spaces on the bottom of the switch.
d. The login name is admin and there is no password assigned. Enable an admin password to secure access to the switch management function. After successful login, the screen should show the (Switch Name)> prompt In this example the prompt is (GSM7324) >. Enter show sysinfo to display the management CPU's IP address. The switch is shipped using DHCP by default to receive its IP address.
For example, to manually set a static IP address, you must first disable DHCP as follows: Enter this command at the prompt: The system responds with these messages: c. Type the default user name of admin and default of no password, or whatever password you have set up. Once you have logged in, your Web browser should automatically find the switch and display the home page. Use the home page to configure the switch. Consult the full manual for your switch on the NETGEAR 7000 Series Managed Switch Resource CD for full configuration and command line options. (GSM7324) >config network protocol none Changing protocol mode will reset ip configuration. [. . . ] in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE NETGEAR GSM7000
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual NETGEAR GSM7000 will begin.
