User manual NETGEAR MP115

[. . . ] User's Manual for the Wireless Digital Media Player MP115 NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA Version 1. 0 November 2004 © 2004 by NETGEAR, Inc. All rights reserved. Trademarks NETGEAR is a trademark of Netgear, Inc. Microsoft, Windows, and Windows Media Player are trademarks or registered trademarks of Microsoft Corporation. [. . . ] You can choose S-Video, SCART, Component Progressive, or Component Interlaced. · · · S-Video: This cable is not included in the package. If your television uses S-Video, you must provide your own cable and set the Video Output to S-Video. SCART: This cable is often used in Europe and Australia, and is not included in the package. However, if you have a SCART cable the MP115 will recognize it. Component Progressive and Component Interlaced: The MP115 is set by default to work with component video cables. To use component progressive you must have a television that supports this technology. Changing the Video Output Settings 1. Push the Settings button on the remote to go to the Settings menu. Use the navigation buttons on the remote control to display the desired setting. Settings and Maintenance November 2004 202-10038-01 5-5 User's Manual for the Wireless Digital Media Player MP115 5. Select Apply, and push OK on the remote control. 5-6 November 2004 202-10038-01 Settings and Maintenance User's Manual for the Wireless Digital Media Player MP115 Changing the Display 1. Push the Settings button on the remote to go to the Settings menu. The Display menu offers the following selections: · · · · Photo/Video Browsing: Choose List View or Thumbnail View. Language on Screen: Choose English, German, or French. Setting the Slideshow Time: Set the length of time that each picture is displayed during a Slideshow. The Slideshow time may be set to 5 seconds, 8 seconds, or 10 seconds, as explained below. Selecting the Screen Saver: Toggle between Floating Logo and Blank Screen. · Setting the Slideshow Time Set the length of time that each picture is displayed during a Slideshow. The Slideshow time can be set to 5 seconds, 8 seconds, or 10 seconds. Push the Settings button on the remote to go to the Settings menu. Use the navigation buttons on the remote control to display the desired setting. Select Apply, and push OK on the remote control. Upgrading the Wireless Digital Media Player MP115 Warning: Do not play media on the Wireless Digital Media Player MP115 during the upgrade. On the computer that runs the Media Server software, download new firmware from the http://www. NETGEAR. com support site. Run the firmware installer program, as described in the firmware release notes. [. . . ] This prevents an attacker from gleaning information about the encryption key and alerts administrators, but it also causes users to lose network connectivity for 60 seconds. More than anything else, this may just prove that no single security tactic is completely invulnerable. WPA is a definite step forward in WLAN security over WEP and has to be thought of as a single part of an end-to-end network security strategy. Product Support for WPA Starting in August, 2003, NETGEAR, Inc. wireless Wi-Fi certified products will support the WPA standard. [. . . ]