User manual NETGEAR PS101V2

[. . . ] Mini Print Ser ver MODEL PS101 Installation Guide Technical Support YOU MUST REGISTER TO OBTAIN TECHNICAL SUPPORT. PLEASE RETAIN PROOF OF PURCHASE AND THE WARRANTY INFORMATION. To register your product, get product support or obtain product information and product documentation, go to http://www. NETGEAR. com/register. You will find technical support information at http://www. NETGEAR. com through the Customer Support area. [. . . ] Open a Web browser and go to the IP address for the print server. (For example, type http://192. 168. 0. 150 and click Go. ) or Programs You can use the NETGEAR Print Server Administration program. Point to and click NETGEAR Print Server>NETGEAR Print Server Administration. 5 4 · · · Configure a Computer To Access the Print Server Before using the PS101 on your network, each computer that needs to access the print server must have: A connection to the network. The printer added using the NETGEAR Add Printer Wizard. Either the printer driver software already installed or, if this is a new printer, access to the printer driver software (either on a CD or downladed to a disk). To install the Add Printer Wizard (for a non-administrative computer): Note: You can skip ahead "To configure computers. . . " if you have already installed the NETGEAR software on this computer. 1. Insert the PS101 Printer Server Resource CD in the CD-ROM drive. NETGEAR Print Server Software Installation wizard starts up automatically. If it doesn't, double-click My Computer, double-click your CD-ROM drive, and double-click Setup. exe. Follow the instructions in the installation wizard to install the software. When asked, select only the NETGEAR Add Printer Wizard. Click Finish. 6 To configure computers running Windows NT, 2000, and XP: 1. Click Start, point to Programs> NETGEAR Print Server and click NETGEAR Add Printer Wizard. Read, follow the instructions, and click OK in the Setup message window. In the list, select the print server port with the printer you want to add to this computer and click Add. When you see the AddPort screen, write down the port name (such as PSFF0091_P1). Printer port name:_____________________________. Scroll down in Add Printer Wizard screen. Select the Print Server port with port name as written above. Click Next. Note: Do NOT select the default port "LPT1. " 4. 5. Select the printer manufacturer on the left and the model on the right or, if you need to install the printer driver, click Have Disk and follow the instructions. If you have installed the printer driver for this printer, you will be asked to keep the existing driver or replace it. Follow the instruction on screen if any. Type a name for this printer and determine whether you want this as the default printer. Select No when asked about sharing the printer and click Next. Note: The print server will perform this function. 6. 7. [. . . ] · · · · · There is a network hardware connection problem. The ALERT light is lit. · · Turn the printer off and unplug the print server's power adapter. Turn the printer on and then plug in the print server's power adapter. Contact NETGEAR if this doesn't solve the problem. 9 I can not print from my computer · · · You may not have selected the correct printer in the Print dialog box. (0. 1 kg) Status LEDs Power Adapter Link and Alert lights 9 V DC, 0. 50A (customized power plug for individual countries) Environmental Specifications Operating temperature Operating humidity Warranty 32° to 104° F (0° to 40° C) 10 to 90%, noncondensing Limited 2-year warranty 12 Statement of Conditions In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes to the products described in this document without notice. [. . . ]