User manual NETGEAR PTV1000

[. . . ] Push 2 TV Adapter (PTV1000)/Intel Wireless Display User Manual NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134 202-10591-01 January 2010 © 2010 by NETGEAR, Inc. All rights reserved. . Technical Support Please refer to the support information card that shipped with your product. By registering your product at http://www. netgear. com/register, we can provide you with faster expert technical support and timely notices of product and software upgrades. [. . . ] The adapter and TV should be in the same room to work properly. If this does not work, see "Common Solutions to Many Issues" on page 2-7. Security Code Issues The phrase, That security code is not correct. . . in the Security Code section, means the wrong security code has been entered. Make sure to type the code exactly as shown on the TV screen. The security code number will change after an incorrect entry. If the connection fails right after a correct security code is entered, it is necessary to connect again and retype the security code. TV Image is Rough, Frozen or Delayed To fix a rough, frozen, or delayed image try each of the following steps individually. · Check the laptop's CPU status. Right-click on the taskbar and choose Start Task Manager. In the Task Manager window click the Processes tab. Under the CPU heading, check WiDiApp. exe. If the WiDiApp. exe CPU number is 80 or above, save documents, and close unused applications. Right click on the taskbar and choose Start Task Manager. In the Task Manager window click the Networking tab. The link speed should be higher than 36 Mbps. If not, try moving the adapter to a different position that is farther away from other electronic equipment, or closer to the laptop. If this does not help, try disconnecting the adapter and connecting again. Change the channel on the wireless router. See the router's manual for channel changing instructions. (If you are not using a router, see the next solution. ) · · -3 v1. 0, January 2010 Push 2 TV Adapter (PTV1000)/Intel Wireless Display User Manual · If you are not connected to a router change the wireless channel. Open Intel My WiFi Utility by clicking on the Intel My WiFi Technology icon in the taskbar and selecting Open Intel My WiFi Utility. Use the help document in Intel My WiFi Utility and search for Access Points. In the results, click Advanced Settings and follow the instructions. Your Video Mode has Changed. . . The video display resolution may change while using Intel Wireless Display. [. . . ] If your laptop screen is not duplicated on your TV, proceed to the next step. In the search field, type Adjust screen resolution and press Enter. Next to the heading Display, select the option other than Multiple Monitors. Next to the heading Multiple displays, choose either one of the duplicate combinations. [. . . ]