User manual NETGEAR R6250-100PES

[. . . ] R6250 Smart WiFi Router User Manual July 2013 202-11215-02 350 East Plumeria Drive San Jose, CA 95134 USA R6250 Smart WiFi Router Support Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label of your product and use it to register your product at https://my. netgear. com. You must register your product before you can use NETGEAR telephone support. NETGEAR recommends registering your product through the NETGEAR website. [. . . ] To ensure that your server computer always has the same IP address, use the reserved IP address feature of your product. See Address Reservation on page 38.  To forward specific incoming protocols: 1. Select Advanced > Advanced Setup > Port Forwarding/Port Triggering. 2. Leave the Port Forwarding radio button selected as the service type. In the Service Name list, select the service name. If the service is not in the list, see Add a Custom Service on page 69 4. The list now includes the service. Add a Custom Service To define a service, game, or application that is not in the Service Name list, first determine which port number or range of numbers the application uses. You can usually determine this information by contacting the publisher of the application or user groups or news groups. When you have the port number information, follow these steps. Security 68 R6250 Smart WiFi Router  To add a custom service: 1. Select Advanced > Advanced Setup > Port Forwarding/Port Triggering. Select the Port Forwarding radio button as the service type. Click the Add Custom Service button. 4. In the Service Name field, enter a descriptive name. In the Service Type field, select the protocol. In the Eternal Starting Port field, enter the beginning port number. • If the application uses a single port, enter the same port number in the Ending Port field. • If the application uses a range of ports, enter the ending port number of the range in the External Ending Port field. 7. Fill in the Internal IP address field or select the radio button from the list of currently attached devices. The service is now included in the list. Edit or Delete a Port Forwarding Entry  To edit or delete a port forwarding entry: 1. Select Advanced > Advanced Setup > Port Forwarding/Port Triggering. Select the Port Forwarding radio button as the service type 3. In the table, select the radio button next to the service name. [. . . ] Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation. 128 R6250 Smart WiFi Router FCC Radio Frequency Interference Warnings & Instructions This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ]