User manual NETGEAR SSL312

[. . . ] NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual NETGEAR, Inc. 350 East Plumeria Drive San Jose, California 95134 USA 202-10208-05 November 2008 v2. 1 © 2008 by NETGEAR, Inc. All rights reserved. Technical Support Please register to obtain technical support. Please retain your proof of purchase and warranty information. [. . . ] To delete a group: Setting Up User and Group Access Policies v2. 1, November 2008 4-13 NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual 1. Click the name of the group that you wish to remove from the Groups table. In the Group Settings window, click Delete Group. The Users and Groups menu displays and the deleted group no longer appears in the list of defined groups. Note: A group cannot be deleted if users have been added to the group or if the group is the default group created for an authentication domain. You can also delete a group by clicking its Delete link. Note: The default group "geardomain" cannot be deleted. Users Configuration SSL VPN Concentrator users are defined from the Users and Groups menu. Under the Access and Administration menu in the left navigation pane, select the Users and Groups option. The Users and Groups menu displays. 4-14 Setting Up User and Group Access Policies v2. 1, November 2008 NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual Figure 4-10 Adding a New User To create a new user: 1. In the Users and Groups menu, click Add User. An Add User menu displays. Figure 4-11 2. In the User Name field, enter the user name for the user. This is the name the user will enter in order to log into the SSL VPN portal. From the Group pull-down menu, select the name of the group to which the user belongs. Setting Up User and Group Access Policies v2. 1, November 2008 4-15 NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual 4. If the selected group is in a domain that uses external authentication, such as Kerberos, RADIUS, NT Domain, or LDAP, then the Add User menu will close and the new user will be added to the Users and Groups table. Note: Groups configured to use Radius, LDAP, NT Domain, or Kerberos authentication do not require passwords because the external authentication server will validate user names and passwords. It is only necessary to enter RADIUS, LDAP, NT and Kerberos user names if you wish to define specific policies or bookmarks per user. If users are not defined in the SSL VPN Concentrator, then global policies and bookmarks will apply to users authenticating to an external authentication server. If the selected group is in a domain that uses internal database authentication, such as the default "geardomain" domain, then the following window displays: Figure 4-12 5. In the Password field, enter the user's password. In the Confirm Password field, re-enter the password. Note: Both the user name and password are case-sensitive. 7. From the User Type pull-down menu, select the user type (either User or Administrator). Click Apply to update the configuration. [. . . ] If When Full is selected, the event log will be e-mailed and then cleared when the log file is full. If Daily or Weekly options are selected, then: · · If "Daily" is selected, the log file will be e-mailed at the configured time between 00 hours and 23 hours selected from the Time pull-down menu. If "Weekly" is selected, the log file will be e-mailed at the configured Day and Time selected from the Day and Time pull-down menus. Note: If "Daily" or "Weekly" are chosen, the log file will still be cleared if the log file is full before the end of the period. [. . . ]