User manual NETGEAR WG103

[. . . ] To register your product, get product support or obtain product information and product documentation, go to http://www. If you do not have access to the World Wide Web, you may register your product by filling out the registration card and mailing it to NETGEAR customer service. You will find technical support information at: http://www. If you want to contact technical support by telephone, see the support information card for the correct telephone number for your country. [. . . ] Select a profile by selecting the corresponding radio button from the list, and click Edit. the Edit Security Profile screen displays. Figure 3-5 shows an example with a WPA2-PSK network authentication. From the Network Authentication pull-down menu, select the WPA or WPA2 option of your choice: • Legacy 802. Some options require that you configure one ore more RADIUS servers (see “Configuring the RADIUS Server Settings” on page 3-9). If you have selected WPA-PSK, WPA2-PSK, or WPA-PSK & WPA2-PSK, enter the passphrase in the WPA Passphrase (Network Key) field. All wireless stations must use the same passphrase (network key). The passphrase must be from 8 to 63 characters in length. (For more information, see “Security Profiles” on page 3-3. Enter the VLAN ID associated with this profile. For more information about WPA, see the online document that you can access from “Wireless Networking Basics” in Appendix B. Restricting Wireless Access by MAC Address For increased security, you can restrict access to the wireless network to allow only specific computers or wireless cards based on their MAC addresses. You can restrict access to only trusted computers so that unknown computers cannot wirelessly connect to the wireless access point. MAC address filtering adds an obstacle against unwanted access to your network, but the data broadcast over the wireless link is fully exposed. Note: For wireless adapters, you can usually find the MAC address printed on the wireless adapter. to restrict access based on MAC addresses: 1. Log in to the wireless access point at its default LAN address of http://192. 229 with its default user name of admin, and default password of password, or using whatever password and LAN address you have chosen for the wireless access point. Note: When configuring the wireless access point from a wireless computer whose MAC address is not in the access control list, if you select Turn Access Control On, you will lose your wireless connection when you click Apply. You must then access the wireless access point from a wired computer or from a wireless computer which is on the access control list to make any further changes. From the Select Access Control Database pull-down menu, select to use a remote MAC address database that is stored on a RADIUS server or to use the local MAC address database that is stored on the wireless access point: • Remote MAC Address Database. You must configure the RADIUS server settings first (see “Configuring the RADIUS Server Settings” on page 3-9). [. . . ] 0 , February 2009 Command Line Reference WG103 ProSafe 802. 11g Wireless Access Point Reference Manual | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |-ssid | |-status | |-vlan-id | |-wep-pass-phrase | |-wepkeytype | |-5> | |-authentication | |-encryption | |-hide-network-name | |-key1 | |-key2 | |-key3 | |-key4 | |-keyno | |-name | |-presharedkey | |-security-separation | | | |-ssid | |-status | |-vlan-id | |-wep-pass-phrase | |-wepkeytype | |-6> | |-authentication | |-encryption | |-hide-network-name | |-key1 | |-key2 | |-key3 | |-key4 | |-keyno | |-name | |-presharedkey | |-security-separation | | | |-ssid | |-status | |-vlan-id | |-wep-pass-phrase | |-wepkeytype | |-7> | |-authentication | |-encryption communication --network name (1-32 chars) --profile status --VLAN id --wireless wep passphrase key --wireless wep key type --5th security profile --authentication type --data encryption --hide network name --wireless wep key 1 --wireless wep key 2 --wireless wep key 3 --wireless wep key 4 --key number --profile name --pre-shared key --disable associated wireless client communication --network name (1-32 chars) --profile status --VLAN id --wireless wep passphrase key --wireless wep key type --6th security profile --authentication type --data encryption --hide network name --wireless wep key 1 --wireless wep key 2 --wireless wep key 3 --wireless wep key 4 --key number --profile name --pre-shared key --disable associated wireless client communication --network name (1-32 chars) --profile status --VLAN id --wireless wep passphrase key --wireless wep key type --7th security profile --authentication type --data encryption Command Line Reference v1. 0 , February 2009 C-9 WG103 ProSafe 802. 11g Wireless Access Point Reference Manual | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |-hide-network-name | | |-key1 | | |-key2 | | |-key3 | | |-key4 | | |-keyno | | |-name | | |-presharedkey | | |-security-separation | | | | | |-ssid | | |-status | | |-vlan-id | | |-wep-pass-phrase | | |-wepkeytype | | | |-8> | | |-authentication | | |-encryption | | |-hide-network-name | | |-key1 | | |-key2 | | |-key3 | | |-key4 | | |-keyno | | |-name | | |-presharedkey | | |-security-separation | | | | | |-ssid | | |-status | | |-vlan-id | | |-wep-pass-phrase | | |-wepkeytype | | | |-wireless-bridge> | |-security-profile> | | |-1> | | | |-authentication | | | |-encryption | | | |-name | | | |-presharedkey | | | |-remote-mac | | | |-status | | | |-wep-pass-phrase | | | |-wepkey | | | |-wepkeytype --hide network name --wireless wep key 1 --wireless wep key 2 --wireless wep key 3 --wireless wep key 4 --key number --profile name --pre-shared key --disable associated wireless client communication --network name (1-32 chars) --profile status --VLAN id --wireless wep passphrase key --wireless wep key type --8th security profile --authentication type --data encryption --hide network name --wireless wep key 1 --wireless wep key 2 --wireless wep key 3 --wireless wep key 4 --key number --profile name --pre-shared key --disable associated wireless client communication --network name (1-32 chars) --profile status --VLAN id --wireless wep passphrase key --wireless wep key type --wireless bridge setting --create security profile --1st security profile --authentication type --data encryption --profile name --preshared key --remote MAC --profile status --wireless wep passphrase key --wireless wep key --wireless wep key type C-10 v1. [. . . ]