User manual NETGEAR WMS5316

[. . . ] No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of NETGEAR, Inc. technical Support Thank you for choosing NETGEAR. To register your product, get the latest product updates, or get support online, visit us at http://support. Trademarks NETGEAR, the NETGEAR logo, ReadyNAS, ProSafe, Smart Wizard, and Auto Uplink are trademarks or registered trademarks of NETGEAR, Inc. [. . . ] To add a wireless station to this table, enter its MAC address and click Add. To move a wireless station from the Available Wireless Stations list to the Trusted Wireless Stations list, select it, and click Move. Click Apply so that your changes take effect. 30 | Chapter 4: Security Configuration ProSafe 16 AP Wireless Management System WMS5316 Reference Manual Radius Server Settings If you are using a RADIUS server in your network for authentication, you must configure Radius settings. You can configure four types of servers: • • • • Primary Authentication Server: The primary authentication server is the main RADIUS server used for authentication. Secondary Authentication Server: A secondary authentication server can be configured for use if the primary authentication server fails or is unreachable. Primary Accounting Server: The primary accounting server is used for accounting on the network. Secondary Accounting Server: A secondary accounting server can be configured for use if the primary authentication server fails or is unreachable. to configure Radius server settings: 1. Click the Configuration tab and select Security > Basic > Radius Server: The primary server is used by default. If the primary server fails, the secondary server is used, if configured. Fill in the IP Address, Port, and Shared Secret fields for each RADIUS server. • The IP Address , Port , and Shared Secret information is required to communicate with the RADIUS server. € The shared secret is shared between the wireless access point and the RADIUS server while the server is authenticating the wireless client. € Re-authentication Time (Seconds): This is the time interval in seconds after which the supplicant will be authenticated again with the RADIUS server. € Update Global Key Every (Seconds): Enable this option to have the global key changed according to the time interval specified. If enabled, enter the time interval you want to use. Click Apply so that your changes take effect. Configuring Guest Access Guest access settings are useful when you are configuring a public access point. The guest access feature is not a captive portal. You can use guest access to: • • • Redirect the user to a guest portal that you specify. Allow users to enter simple information such as an email address. [. . . ] Failure of the end-user to comply with the applicable requirements may result in unlawful operation and adverse action against the end-user by the applicable National regulatory authority. Note: This product’s firmware limits operation to only the channels allowed in a particular Region or Country. Therefore, all options described in this user's guide may not be available in your version of the product. Europe – EU Declaration of Conformity Marking by the above symbol indicates compliance with the Essential Requirements of the R&TTE Directive of the European Union (1999/5/EC). [. . . ]