User manual NETGEAR WN3000RP

[. . . ] No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of NETGEAR, Inc. technical Support Thank you for choosing NETGEAR. To register your product, get the latest product updates, get support online, or for more information about the topics covered in this manual, visit the Support website at http://support. Phone (US & Canada only): 1-888-NETGEAR Phone (Other Countries): Check the list of phone numbers at http://support. [. . . ] The wireless network router assigns an IP address when the Extender connects to its wireless network. Most networks are set up so that the router automatically does this. If you set this up, you should be technically experienced or have a technically experienced person help you. The subnet mask associated with the IP address. Net, after the automatic firmware check, the Status screen displays. You can also select Status from the menu to display this screen: This screen shows the current settings and the status of your Extender. You can click Show Statistics to see device performance statistics such as the number of packets sent and number of packets received for each port. The model of the hardware and the currently running firmware version. Your Extender is set up to connect to this SSID, also called the wireless name. The status of your wireless connection (connected or disconnected). The actual transmission (Tx) and receive (Rx) link rate in the current wireless connection. extender Network Settings 19 Universal WiFi Range Extender WN3000RP Extender IP Info • • • • • • MAC Address. The physical address of the Extender, as seen from the local area network (LAN). Identifies the network DHCP client on the wireless network. The IP subnet mask associated with the LAN IP address of the Extender. He IP address of the wireless network gateway. The IP address of the Domain Name Server (DNS) of the wireless network. extender Wireless Settings • • • • • • Name (SSID). The name (SSID) of the wireless network. The country where the Extender is set up for use. The current channel, which determines the operating frequency. Indicates if the Extender is configured to broadcast its SSID. [. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following methods: • Reorient or relocate the receiving antenna. [. . . ]