User manual NETGEAR WN802T

[. . . ] RangeMax NEXT Wireless-N Access Point WN802T Reference Manual NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA 202-10204-03 v1. 0 August 2007 © 2007 by NETGEAR, Inc. All rights reserved. . Trademarks NETGEAR, the NETGEAR logo, RangeMax and Auto Uplink are trademarks or registered trademarks of NETGEAR, Inc. Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation. [. . . ] Only select this if all clients support WPA2. If selected, you must use AES encryption, and configure the Radius Server Settings Screen. If selected, encryption must be TKIP + AES. If selected, you must configure the Radius Server Settings Screen. WPA-PSK (TKIP) + WPA2-PSK (AES) WPA with Radius WPA2 with Radius WPA and WPA2 with Radius 3-2 v1. 0, August 2007 Wireless Security Settings RangeMax NEXT Wireless-N Access Point WN802T Reference Manual · Data Encryption. The available options depend on the Network Authentication setting selected (see Table 3-1 above); otherwise, the default is None. The Data Encryption settings are explained in the table below: Table 3-1. Data Encryption Settings Data Encryption Type None 64 bits WEP 128 bits WEP TKIP AES Description No encryption is used. Standard WEP encryption, using 40/64 bit encryption. Standard WEP encryption, using 104/128 bit encryption. Automatic encryption with WPA-PSK; requires passphrase Automatic encryption with WPA2-PSK; requires passphrase · WEP Authentication Type. WEP can be authenticated using Open System or Automatic. If set to Open System, clients can only associate to the wireless access point by using the Open System option. If set to Automatic, clients can associate to the wireless access point using both Open System and Shared Key. Setting the Authentication Type to Automatic will detect which WEP authentication method is being used. Use of Passphrases and Keys are explained below: ­ Passphrase. To use the Passphrase to generate the WEP keys, enter a passphrase and click the Generate Keys button. These keys must match the other wireless stations. If using WEP, select the key to be used as the default key. Data transmissions are always encrypted using the default key. The other keys can only be used to decrypt received data. If using WPA-PSK, WPA2-PSK or WPA-PSK + WPA2-PSK, enter the passphrase here. All wireless stations must use the same passphrase (network key). [. . . ] If they do, ensure that your computer's IP Address, Subnet Mask and Default Gateway settings are correct. If using a DNS Server, check the Primary and Secondary DNS Server Addresses. If the computers are configured correctly, but still not working, ensure that the WN802T is connected and turned on. If you cannot connect to it, check the LAN and power connections. [. . . ]