User manual NETGEAR WNDA4100

[. . . ] All rights reserved No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of NETGEAR, Inc. technical Support Thank you for choosing NETGEAR. To register your product, get the latest product updates, get support online, or for more information about the topics covered in this manual, visit the Support website at http://support. Phone (US & Canada only): 1-888-NETGEAR Phone (Other Countries): Check the list of phone numbers at http://support. [. . . ] Then go to your wireless router, gateway, or access point and press its WPS button. set up Your Wireless Adapter 10 N900 Wireless Dual Band USB Adapter (WNDA4100)  To manually connect without WPS: 1. Select the Enter wireless information myself radio button. There are four security types that can be displayed for the network: None, WEP, WPA-PSK, and WPA2-PSK. The password (passphrase) is between 8 and 63 characters in length. In the fields provided, type the network name (SSID), select the security type, and type the passphrase (password). Maintenance 2 This chapter includes the following sections: • • • Other Screen Remove the Software Frequently Asked Questions (FAQs) 12 N900 Wireless Dual Band USB Adapter (WNDA4100) Other Screen In NETGEAR Genie, click the Other button to display the following screen: Sent/Receive Activity Sent Packets. Total number of packets sent while communicating with the wireless network. Total number of packets received from wireless network communications. The IP address assigned to this adapter. This can change if you disconnect from the network and rejoin it later. Wireless security used for the adapter to connect to the current wireless network. The Media Access Control (MAC) address of this adapter. The MAC address is a unique 48-bit hardware address assigned to each wireless device. As a security measure, some wireless networks restrict access based on a list of known MAC addresses. If you try to join such a network, you have to provide your adapter’s MAC address (shown here) to the network administrator before you can connect. This is the region setting for the wireless adapter. Wireless channels in use depend on the country or region. Your wireless adapter automatically scans approved channels for your region when it checks to see which networks are available in your area. Governments regulate the channels used for wireless transmission. Operating the wireless adapter in a different region might violate local laws. maintenance 13 N900 Wireless Dual Band USB Adapter (WNDA4100) Support Get Diagnostics Info. [. . . ] Note: The country code selection is for non-US models only and is not available to all US models. Per FCC regulation, all Wi-Fi products marketed in the US must be fixed to US operation channels only. The FCC has established detailed SAR requirements and has established that these requirements have been met while installed in the host notebook computer. For products available in the USA/Canada market, only channel 1~11 can be operated. [. . . ]