User manual NETGEAR WNHD3004

[. . . ] 3DHD Home Theater Adapter WNHD3004 User Manual NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134 USA 202-10624-02 November 2010 v1. 0 2010 by NETGEAR, Inc. All rights reserved. Product Registration, Support, and Documentation Register your product at http://www. netgear. com/register. Registration is required before you can use our telephone support service. [. . . ] In the main menu under Setup, select Wireless Settings. Select one of the WPA-PSK or WPA2-PSK options for the security type. The WPA + WPA2 option is the most flexible, since it allows clients using either one. In the Passphrase field, enter a word or group of 863 printable characters. Click Apply to save your settings. Viewing Advanced Wireless Settings This section describes the wireless settings that you can view and specify in the Advanced Wireless Settings screen, which you access under Advanced in the main menu. In the main menu under Advanced, select Advanced Wireless. 4-6 v1. 0, November 2010 Wireless Security 3DHD Home Theater Adapter WNHD3004 User Manual The available settings in this screen are: Enable SSID Broadcast. If this check box is selected, the wireless access point will broadcast its name (SSID) to all wireless stations. Stations will be able to see this SSID for connections to this Access Point. WMM (Wi-Fi Multimedia) is a component of the IEEE 802. 11e wireless LAN standard for quality of service (QoS). It specifically supports priority tagging and queuing. For information about these settings, see the following section, "Using Push 'N' Connect (Wi-Fi Protected Setup)" on page 4-7. For information about this list, see "Restricting Wireless Access by MAC Address" on page 4-10. Using Push 'N' Connect (Wi-Fi Protected Setup) If your wireless clients support Wi-Fi Protected Setup (WPS), you can use this feature to connect a wireless client securely and easily to the Access Point. Look for the symbol on your client device. WPS automatically configures the wireless client with the same network name (SSID) and wireless security settings on the access point. Note: NETGEAR's Push 'N' Connect feature is based on the Wi-Fi Protected Setup (WPS) standard (for more information, see http://www. wi-fi. org). All other Wi-Ficertified and WPS-capable products should be compatible with NETGEAR products that implement Push 'N' Connect. When you add wireless clients, whether or not they are WPS enabled, the added devices must share the same network name (SSID) and security passphrase. For more information, see "Connecting Additional Wireless Client Devices after WPS Setup" on page 4-10. The home theater adapter provides two methods for connecting to a wireless client that supports WPS, described in the following sections: Push Button Configuration" Enabling a Wireless Client Wireless Security v1. 0, November 2010 4-7 3DHD Home Theater Adapter WNHD3004 User Manual Push Button Configuration There are two methods to enable a wireless client to join a network using a push button on the router: using the physical push button or using the software button in the Add WPS Client screen. Press the button on the home theater adapter for over 5 seconds. The blue button light begins to blink in a regular pattern. While the light is blinking, you have 2 minutes to enable WPS on the client that you are trying to connect to the AP or Bridge. [. . . ] These autogenerated addresses are in subnet 169. 254. x. x. If your IP address is in this range, check the connection from the computer to the router, and reboot your computer. Try closing the browser and opening it again, or try a different browser. Make sure that you are using the correct login information. [. . . ]