User manual NETGEAR WPGS606 INSTALLATION GUIDE

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual NETGEAR WPGS606. We hope that this NETGEAR WPGS606 user guide will be useful to you.

Lastmanuals help download the user guide NETGEAR WPGS606.

Download

Manual abstract: user guide NETGEAR WPGS606INSTALLATION GUIDE

Detailed instructions for use are in the User's Guide.

 [. . . ] Note: See the installation instructions for your operating system before attaching the USB cable to the USB Adapter and your computer. Estimated Completion Time: 20 minutes for each printer; 10 minutes for each computer. 

2. USE THE SMART WIZARD TO SET UP A PRINTER. 
a.  [. . . ] Note: Failure to follow these guidelines can result in significant performance degradation or inability to wirelessly connect. For best results,  place your wireless USB print server: · · · · In an elevated location such as a high shelf where the wirelessly connection to the network has line-of-sight access (even if through walls). Away from sources of interference,  such as computers,  microwaves,  and 2. 4 GHz cordless phones. Set the antenna vertically for best side-to-side coverage or horizontally for best top-to-bottom coverage. 

directly connected to your computer,  refer to your printer documentation for assistance. Once the wireless USB print server is connected,  always restart your network in this sequence: 1. Turn off and unplug the modem,  turn off the router,  shut off the wireless USB print server,  turn off the printer,  and shut down the computer. Turn on the wireless USB print server and printer. For each powered on computer or printer connected to the wireless USB print server,  the corresponding LAN or printer status light will be lit. The label on the bottom of the wireless USB print server identifies these port and status light locations. If the wireless feature is turned off the wireless status light will be off. The Wireless Network Name (SSID) and security settings of the router and wireless USB print server must match exactly. For example,  entering nETgear for the SSID is not the same as entering NETGEAR. Make sure the network settings of the computer are correct. Both Ethernet cable and wirelessly connected computers must be configured to obtain IP and DNS addresses automatically via DHCP. Check the status lights to verify correct operation. The Power light should turn solid green.  [. . . ] If you cannot print from your computer when the printer is

© 2005 by NETGEAR,  Inc. NETGEAR is a registered trademark of NETGEAR,  Inc. in the United States and/or other countries.  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE NETGEAR WPGS606

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual NETGEAR WPGS606 will begin.