User manual NETGEAR WPNT834

[. . . ] Reference Manual for the RangeMax 240 Wireless Router WPNT834 NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA 202-10130-01 November 2005 © 2005 by NETGEAR, Inc. November 2005. Trademarks NETGEAR is a trademark of Netgear, Inc. Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation. [. . . ] The Block Services Setup menu appears, as shown below: Figure 5-3 From the Service Type list, select the application or service to be allowed or blocked. The list already displays several common services, but you are not limited to these choices. To add any additional services or applications that do not already appear, select User Defined. Configuring a User Defined Service To define a service, first you must determine which port number or range of numbers is used by the application. The service numbers for many common protocols are defined by the Internet Engineering Task Force (IETF) and published in RFC1700, "Assigned Numbers. " Service numbers for other applications are typically chosen from the range 1024 to 65535 by the authors of the application. This information can usually be determined by contacting the publisher of the application or from user groups of newsgroups. Enter the Starting Port and Ending Port numbers. If the application uses a single port number, enter that number in both boxes. If you know that the application uses either TCP or UDP, select the appropriate protocol. If you are not sure, select Both. 5-4 v1. 0, November 2005 Content Filtering Reference Manual for the RangeMax 240 Wireless Router WPNT834 Blocking Services by IP Address Range Under "Filter Services For", you can block the specified service for a single computer, a range of computers (having consecutive IP addresses), or all computers on your network. Scheduling When Blocking Will Be Enforced The WPNT834 router allows you to specify when blocking is enforced. The Schedule menu is shown below: Figure 5-4 Use this schedule for blocking content. Select days to block by checking the appropriate boxes. Select Every day to check the boxes for all days. Select a start and end time in 24-hour format. Click Apply. Be sure to select your Time Zone in the E-Mail menu. Content Filtering v1. 0, November 2005 5-5 Reference Manual for the RangeMax 240 Wireless Router WPNT834 Viewing Logs of Web Access or Attempted Web Access The log is a detailed record of the Web sites you have accessed or attempted to access. Up to 128 entries are stored in the log. Log entries only appear when keyword blocking is enabled, and no log entries are made for the Trusted User. An example is shown below: Figure 5-5 Log entries are described in the following table. Table 5-1. Log entry descriptions Field Description Date and Time Source IP Target address The date and time the log entry was recorded. The IP address of the initiating device for this log entry. The name or IP address of the Web site or newsgroup visited or attempted to access. This field displays whether the access was blocked or allowed. Action 5-6 v1. 0, November 2005 Content Filtering Reference Manual for the RangeMax 240 Wireless Router WPNT834 Log action buttons are described in the following table. Table 5-2. Log action buttons Field Description Refresh Clear Log Send Log Click this button to refresh the log screen. [. . . ] Web browser access normally uses the standard HTTP service port 80. For greater security, enter a custom port number for the remote management Web interface. Choose a number between 1024 and 65535, but do not use the number of any common service port. The default is 8080, which is a common alternate for HTTP. [. . . ]