User manual NETGEAR XAV101 04-2008

[. . . ] XAV101 Powerline AV Ethernet Adapter User Guide NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA 202-10339-01 April 2008 © 2008 by NETGEAR, Inc. All rights reserved. Technical Support See the support information card that shipped with your product. By registering your product at http://www. netgear. com/ register, we can provide you with faster expert technical support and timely notices of product and software upgrades. [. . . ] This generates a new, randomly generated network encryption key for each Powerline AV Ethernet Adapter. At this point, the adapters cannot communicate with each other. Push the button on one adapter for 2 seconds, then push the button on the second adapter for 2 seconds. Both buttons must be pushed within 2 minutes. This securely configures your Powerline network with the same network encryption key. The adapters retain security settings even if they are unplugged. To add more adapters into your network: a. Push the button on the new adapter for 2 seconds, then push the button on any adapter in your existing network for 2 seconds. Both buttons must be pushed within 2 minutes. Repeat the previous step (3. a. ) for any additional adapters you are adding. Installation and Basic Configuration v1. 0, April 2008 1-7 XAV101 Powerline AV Ethernet Adapter User Guide 1-8 v1. 0, April 2008 Installation and Basic Configuration Chapter 2 Using the XAV101 Configuration Utility This chapter explains how to use the XAV101 Configuration Utility. You can use this utility to configure encryption for your Powerline network and to use quality of service (QoS) features to prioritize Powerline network traffic. Installing the XAV101 Configuration Utility (Recommended) This utility provides you with the option of setting your own unique encryption Powerline network encryption key, and prioritizing traffic passing through the Powerline network. To install the XAV101 Configuration Utility: 1. Insert the Resource CD into a CD drive on the computer that is connected to your router1. The CD automatically starts and displays the following screen: Figure 2-1 1. All devices on a Powerline network can be managed from one computer. If you add another Powerline AV Ethernet Adapter to a Powerline network, you can install the Powerline configuration utility on the computer connected locally to the new adapter, or open the utility on the computer originally used to set up the Powerline network encryption key. You can use any computer to manage the network, but this procedure assumes that you are working from the computer that is connected to your router. 2-1 v1. 0, April 2008 XAV101 Powerline AV Ethernet Adapter User Guide If the CD does not start automatically: · · Go to My Computer on the Windows Start menu, and double-click the drive that represents the location of the Resource CD or Select the CD drive, and click the Autorun. exe executable file. 2. Click Install Software to display the Welcome screen: Figure 2-2 3. Click Next, and follow the wizard prompts. When the wizard is done, the following screen displays: Figure 2-3 4. The XAV101 Configuration Utility icon appears on your desktop. To use the XAV101 Configuration Utility, double-click the icon. 2-2 v1. 0, April 2008 Using the XAV101 Configuration Utility XAV101 Powerline AV Ethernet Adapter User Guide Main Tab You can start the XAV101 Configuration Utility by clicking the XAV101 icon on your desktop, or from the Windows Program menu. [. . . ] When power is first applied, verify that the Power light is on. After approximately 10 seconds, verify that: a. The Ethernet light on the Powerline AV Ethernet Adapter lights or blinks. If any of these conditions does not occur, refer to the appropriate following section. 3-1 v1. 0, April 2008 XAV101 Powerline AV Ethernet Adapter User Guide Troubleshooting Tips The following table lists problems and recommendations. Problem Power light is off. [. . . ]