User manual NETGEAR XWNB1601

[. . . ] €¢ • • • When you plug in the Powerline device, the Power LED lights and turns green. The Ethernet LED lights and turns green when you connect a powered-on Ethernet device to at least one Ethernet port. If the LED is off, there is no Ethernet connection. [. . . ] When the Wireless LED stops blinking, the cloning is finalized. The WiFi range extender (XAVN2001) re-creates a WiFi access point with the same SSID and password as your router or gateway. You now have two wireless networks with the same settings (SSID and password). When you are roaming in your house, your wireless client (laptop, tablet, or smartphone) switches from one network (router or gateway) to the other (XAVN2001), depending on the signal quality. 10 • Option 2: Use NETGEAR genie to manually configure the wireless settings of your XAVN2001 extender. Temporarily connect your computer directly to the XAVN2001 through the Ethernet port. Launch NETGEAR genie on your computer and click Network Map or select it from the menu. Click the Powerline icon on the Network Map screen. the Powerline Utility screen displays: Powerline icon XAVN2001 icon e. On the Powerline Utility screen, right-click the XAVN2001 icon. From the pop-up menu that displays, select Wireless configuration. Enter the following wireless settings: • Wireless Network Name (SSID) • • Wireless Security Type Passphrase 13 If you want to clone your existing wireless network, enter the same wireless settings that your router or gateway uses. When you are roaming in your house, your wireless client (laptop, tablet, or smartphone) switches from one network (router or gateway) to the other (XAVN2001), depending on the signal quality. If you want to create a new wireless network, enter new wireless settings. Creating a new wireless network lets you have a second network in another zone of your house. When you are finished with the wireless settings, disconnect the Ethernet cable from the XAVN2001. Note: You can access advanced wireless settings by right-clicking the device icon and selecting the IP address on the pop-up menu. The login and password are admin and password. [. . . ] 19 Compatible NETGEAR Powerline Devices Your Powerline devices can share a Powerline network with these compatible NETGEAR devices: XAVB1301, XAVB1401, XAVB2101, XAVB2602, XAVNB2001, XAVB5601, XAVB5101, XAVB5201, XAVB5602, XAUB2511, XAVB5004, XAVB1004, XWNB5602, and XWNB5201. For a complete list of HomePlug AV certified devices, visit www. ) Operating temperature: 0°C–40°C  You can get the user manual online at http://downloadcenter. [. . . ]