User manual NEX 720-0335

[. . . ] STAINLESS STEEL LP GAS GRILL MODEL NO. : 720-0335 ITEM NO: 242608 ® FOR OUTDOOR USE ONLY PLEASE CONTACT 1-800-554-5799 FOR ASSISTANCE DO NOT RETURN TO PLACE OF PURCHASE TABLE OF CONTENTS SECTION ONE Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Placement of the Grill . . . . . . . . . . . . . . . . . . . . . . . . . . . SECTION TWO Assembly Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Caster Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] This is a normal property of the non-rusting type stainless steel used on the grill. WARNING The rotisserie motor is equipped with a plug and should be plugged directly into a properly grounded receptacle. Do not cut or remove the grounding prong from this plug. Keep the rotisserie motor cord away from heated surfaces of the grill. When not in use remove and store the motor in a dry location. THE ROTISSERIE SKEWER The skewer for the rotisserie should be assembled into the motor by placing the pointed end into the motor, and then sliding the grooved bushing into the slot at the opposite side of the grill. The thumbscrew for the grooved bushing should be inside the grill body. The grill is designed to cook efficiently without the use of lava rocks or briquettes of any kind. Heat is radiated by the stainless steel flame tamers positioned above each burner. Screw the bushing onto the skewer rod at the opposite end from the point. Slide and tighten the counter balance apparatus onto the skewer rod approximately 2 to 4 inches from the bushing. Slide the first meat fork onto the skewer rod prongs toward the food. Center the product to be cooked on the skewer, and then push the meat forks firmly together. It may also be necessary to wrap the food with butcher's string to secure loose portions. Never use nylon or plastic string to wrap the food. Once the food is secure, insert the skewer into the motor. 24 NOTE It is normal for the skewer to flex when larger cuts of meat are being cooked. If the meat scrapes on the cooking grids during any part of the rotation, the cooking grids must be removed. Test this clearance before lighting the grill as the cooking grids become hot when the grill is lit. Adjust the counter balance weight to balance the heavier side of the meat and avoid lopsided rotation of the rotisserie motor. CAUTION When using the rotisserie burner, remove the warming rack. High heat from the burner may cause the warming rack to bend. LIGHTING INSTRUCTIONS BEFORE LIGHTING. . . Inspect the gas supply hose prior to turning on the gas. If there is evidence of cuts, wear, or abrasion, it must be replaced prior to use. WARNING Do not use the grill if the odor of gas is present. [. . . ] Use the above basting sauce for rotisserie baking TURKEY 12 lb. turkey Beer basting sauce: 1 can beer 12 oz. Securely tie the legs and wings before placing the turkey on the rotisserie spit rod. Combine all the ingredients for basting sauce in a shallow pan. [. . . ]