User manual NEXTBASE IN CAR CAM 302 G DELUXE

[. . . ] Driving Recorder Player Software Installation Guide TABLE OF CONTENTS PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CAUTIONS ON USING THIS PRODUCT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PRODUCT SPECIFICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PACKAGE CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] File Number: Displays current file number. Resolution: Displays the size of current photo. Date & Time: Displays date and time of current file. 13 MENUS AND SETTINGS Each mode (Video, Photo and Playback) has a menu used to access the various options and settings, press the MENU button on the rear of the device to access the menu, specific to the current mode selected. Use the UP, DOWN buttons to select chosen option and press the OK button to confirm. VIDEO MODE 1. 1 Resolution Select recording resolution, this will increase or decrease the quality of the recorded video. Default Setting: 720P (1280 x 720 @ 30Fps) 1. 2 Loop Recording This feature enables continuous recording of your whole journey to be made, but the recording is broken down in to manageable bite sized chunks. In the event of an incident you will always have the latest video footage, for play back later and in a manageable file size. Each bite sized chunk can be set to either 2, 3 or 5 minutes long. Default Setting: = 3 Mins Note: - When the SD card becomes full of recordings from your journey, the oldest recordings are deleted automatically, in order to make space for the new recordings (any protected files are however not deleted). - The OFF setting is NOT preferred, as this will result in massive file sizes, which are then unmanageable and risk being corrupted. 1. 3 Motion Detection Turn On / Off the motion detection function, the device will need to remain powered on and will start a 30 second recording when a change to the viewed scene is detected. Default Setting: Off Note: Motion Detection is NOT required for the recording of normal driving situations. Please do select On unless strictly necessary. 1. 4 G Sensor Turn Off or adjust the sensitivity of the G Sensor, it is the G Sensor that detects forces which will automatically protect the current recording in event of a collision. Default Setting: Medium 1. 5 Record Audio Turn On / Off audio recording. Default Setting: On 1. 6 Exposure Select exposure, used to adjust exposure level for different light conditions. Default Setting: 0 1. 7 Date & Speed Stamp Turn On / Off the date and speed stamp shown on recorded files. Default Setting: On 1. 8 Speed Units Selected required speed units, MPH or KPH. Default Setting: MPH 14 MENUS AND SETTINGS (CONTD. ) 2. PHOTO MODE 2. 1 Capture Mode Turn On / Off the timer function, when this feature has been turned on, the iN-CAR CAM will take a photo the selected period of time after the OK button has been pressed. Default Setting: Single 2. 2 Resolution Select image size, this will increase or decrease the size of the recorded image Default Setting: 5M 2. 3 Quality Increase or decrease the quality of the recorded image. Default Setting: Fine 2. 4 Sharpness Adjust the sharpness of the recorded image. [. . . ] to enable the cycle recording function and automatic deletion of older files. With the IR LED's turned on, they Normal. The IR LED's are intended for short range use only. do not seem to enable night time For night time recording the vehicle headlights provide the illumination of the road ahead. [. . . ]