User manual NIKE PSC[COMMUNICATE

[. . . ] Note: When Battery power is low the indicator will blink. liquid crystal display ¥ Weather Mode Indicator ¥ Button Lock Indicator ¥ Boost/Power save Indicator ¥ Transmitting indicator ¥ Receiving Indicator ¥ Sub Channel Indicator ¥ Channel indicator ¥ Battery power remaining indicator ¥ Voice activated call Indicator (psc communicate wx only) ¥ On/off indicator ¥ Volume indicator battery compartment access FCC Warning: Replacement or substitution of transistors, regular diodes or other parts of a unique nature, with parts other than those recommended by Nike, may cause a violation of the technical regulations of part 95 of the FCC rules, or violation of Type Acceptance requirements of Part 2 of the Rules. liquid crystal display ¥Button confirmation tone/roger beep indicator 2 3 psc[communicate. manual. 3qx 6/29/00 2:47 PM Page 4 basic operation power button There are 3 different power settings: 1. Use Power Save Mode to save battery life when talking over shorter distances. When you first turn on the unit, Power Save is selected. Use Power Boost Mode to achieve maximum talk range. power button select power settings 1. [. . . ] Vox (OFF, ON LO, ON HI) (psc[communicate wx only) mode button When you have proceeded through all adjustable settings, the normal display will reappear. Or, press TALK at any time to return to the normal display. 10 11 psc[communicate. manual. 3qx 6/29/00 2:47 PM Page 12 basic operation select main channel There are 14 main channels. Press + and - keys to select the main channel. select main channel select sub channel Each main channel has 38 sub channels, sometimes called CTCSS channels. Select one of these sub channels to transmit on a channel that is free from traffic. Press MODE until SUB CHAN is displayed 2. Press + and - keys to select the sub channel. Note :If you select channel "0, " you will be able to receive transmissions from all the sub channels of the main channel you selected. 12 13 psc[communicate. manual. 3qx 6/29/00 2:47 PM Page 14 basic operation scan channels The channel scan feature allows you to scan all channels for broadcast traffic. You can also scan the sub channels of a channel in order to identify the specific sub channel of the broadcast traffic. Press + or - keys to begin scanning the main channels. The unit will scan all main channels and stop on a channel where broadcast traffic is detected. Once traffic is found, you have 10 seconds to do one of the following: ¥ Press TALK to begin broadcasting on that channel. ¥ Press + or - keys to continue scanning other main channels. ¥ Proceed to sub channel scan to identify the specific sub channel of the broadcast. channel scan 14 15 psc[communicate. manual. 3qx 6/29/00 2:47 PM Page 16 basic operation scan sub channels The sub channel scan feature allows you to identify the exact sub channel of a broadcast on one main channel. Select a main channel to scan, either by scanning main channels for broadcast activity (see above) or manually selecting a channel. Press + or - keys to begin scanning the sub channels. *The unit will scan the sub channels of the selected channel. It will stop where broadcast traffic is detected. Once traffic is found, you have 10 seconds to do one of the following: ¥ Press TALK to begin broadcasting on that channel. ¥ Press + and - keys to continue scanning other sub channels. sub channel scan 16 17 psc[communicate. manual. 3qx 6/29/00 2:47 PM Page 18 basic operation confirmation tone button confirmation tone and "roger beep" on/off When this feature is activated, two things will happen: ¥ a tone will sound at the press of any button, confirming that you have pressed it. ¥ a tone will sound whenever you release the TALK button that is audible to anyone else on your same channel and sub channel. It's is an easy way to signal that you are done transmitting, and helps to avoid "talking over" someone else. To activate the confirmation tone and "roger beep": 1. Press MODE until the [insert bell icon] is displayed 2. [. . . ] Broadcast range depends on the environment. This warranty also does not apply to any product with an altered or defaced serial number. limits of liability: We are only responsible for the repair of this product. We will not be liable to you or anyone else for any damages that result from the failure of this product or from the breach of any express or implied warranties. These include damage to other equipment, lost data, lost profits, or any consequential, incidental, or punitive damages. [. . . ]