User manual NIKE TRIAX MOBIUS

[. . . ] TRIAX MOBIUS · TRIAX SPEED 100 · TRIAX SPEED 50 · TRIAX SPEED 10 +/_ to change value Continue to Next Setting Select 12 or 24 Hour Clock Select Day or Month Display In TIME mode you can set time and calendar information within two time zones. [. . . ] Power Save: Display shuts off to conserve battery life. Press any button to turn watch ON NOTE: The TRIAX SPEED 10 has one time zone and one alarm BEGIN setting Time and Date 2 sec Turn Button Chime ON / OFF Adjust Screen Contrast Electrolite ON Switch Time Zones 1 sec 2 sec EXIT Time and Date TIME Warp: Hold for 1 second in any mode to return to TIME mode Scroll to TIME mode to set Alarms Alarm ON / OFF BEGIN by pressing VIEW button to select Alarm 1 or Alarm 2 2 sec Adjusted Alarms turn ON upon EXIT RUN mode can be used to capture lap and total time data down to 1/ 100th of a second. The convertible display can be easily switched between total time, lap time or both simultaneously during a workout. NOTE: The TRIAX SPEED 10 does not have a convertible display VIEW button changes the convertible display to total time, lap time or both simultaneously Mark LAP 2 ( Lap flashes for 2 sec onds) START Run Mark LAP 1 ( Lap flashes for 2 sec onds) STOP Run Run saved to DATA mode 2 sec 2 sec RESET Run NOTE: The TRIAX SPEED 10 has a one run memory. Run is automatically stored to DATA mode. CHRONOGRAPH LIMITS TRIAX MOBIUS / TRIAX SPEED 100 19:59' 59" 99 (auto stops) · 30 Run memory · 100 Laps TRIAX SPEED 50 19:59' 59" 99 (auto stops) · 10 Run memory · 50 Laps TRIAX SPEED 10 19:59' 59" 99 (auto stops) · 1 Run memory · 10 Laps H20 RESIST 100 m ATTENION: Water damage may occur if the buttons are pressed underwater MATERIAL SPECIFICATIONS CRYSTAL Mineral Glass STRAP Polyurethane CASE Polycarbonate CASEBACK Stainless Steel BEZEL Stainless Steel BUTTONS Polycarbonate BUCKLE Stainless Steel OPERATING TEMPERATURE -5 to 50° Celsius RUN mode has a PACE function which compares actual lap and total times to preset PACE target times NOTE: The TRIAX SPEED 10 does not have the PACE function EXIT back to RUN mode Turn PACE targets ON / OFF 2 sec Turn PACE ALARM ON / OFF The PACE ALARM will give 5 short beeps before the end of each target segment Set Segment 1 _ Seconds, Minutes and Hours Lap and total target time differentials display for 2 seconds Mark LAP 2 Mark LAP 1 STOP Run START Run View PACE target times before starting workout 5 sec CLEAR ALL PACE segments 2 sec In INTERVAL mode you can set five repeating segments for customized interval training. NOTE: The TRIAX SPEED 10 does not have INTR mode Set Segment 1 _ Seconds, Minutes and Hours ( 19:59' 59" maximum ) Set up to 5 segments 2 sec START interval workout. [. . . ] Segment begins to countdown This example demonstrates a 7'30" run and 1'15" walk repeating workout Press STOP to pause workout. Press START to continue workout. 99 segment loop maximum 2 sec 5 sec CLEAR ALL Segments RESET ALL Segments In DATA mode you can review workout data saved from RUN mode Select RUN DATA mode records Total Time, All Lap Times, Best Lap and Average Lap DATA mode with the PACE targets turned ON 5 sec CLEAR ALL Runs CLEAR Selected Run 2 sec [. . . ]