User manual NIKON AF 18-35MM F/3.5-4.5D IF-ED

[. . . ] To release the lock, slide the lever in the reverse derectopm. To protect the lens surface from dirt or damege, replace This lens cannot be used with the AF Finder DX-1 attached to the Nikon F3AF camera. [. . . ] To protect the lens surface from dirt or damege, replace This lens cannot be used with the AF Finder DX-1 attached to the Nikon F3AF camera. Do not attach the following accessories to the lens, Various interchangeable focusing screens are available for Nikon F6-, F5-, F4- and F3-series cameras to suit any type of lens or picture-taking situation. Those which are recommended for use with this lens are listed in the table. Both the front and rear caps whenever the lens is not in use. ⷠDo not splach water on the lens or drop it in the water because this will cause it to rust and malfunction. ⷠIf you will not use the lens for a long time, protect it from rust and mold by storing it in a cool, dry place. When using screens other than type B or E, "Other screen" must be selected even when the required compensation value is "0" (no compensatio required). See instruction manual of the camera body for more details. Since type M screen can be used for both macrophotography at 1:1 magnification ratio and for photomicrography, it has different applications than other screens. When using the B2/B3, E2/E3 and K2/K3 focusing screens in cameras other than those listed above, refer to the columus for the B, E and K screens. 2 PK-series Rings PN Ring Bellows PB-4 or PB-5 Bellows PB-6 Slide copying adapter PS-4 or PS-5 Slide copying adapter PS-6 Macro copy stand PS-6M Extension bellows PB-6E Reprocopy Outfit PF-2, PF-3 or PF-4 Lens in normal position Lens in reverse position Focused distance Reproduction ratio Subject field Focused distance The first values are for the RK-11A or PK-11 ring used alone and the second ones for the PK-11A­PK-13, PK-11­PK-13, or PK-1­PK-3 used together. However the PK-11 and PK-1 rings cannot be attached directly to the lens. [. . . ] 2 PK-series Rings PN Ring Bellows PB-4 or PB-5 Bellows PB-6 Slide copying adapter PS-4 or PS-5 Slide copying adapter PS-6 Macro copy stand PS-6M Extension bellows PB-6E Reprocopy Outfit PF-2, PF-3 or PF-4 Lens in normal position Lens in reverse position Focused distance Reproduction ratio Subject field Focused distance The first values are for the RK-11A or PK-11 ring used alone and the second ones for the PK-11A­PK-13, PK-11­PK-13, or PK-1­PK-3 used together. However the PK-11 and PK-1 rings cannot be attached directly to the lens. [. . . ]