User manual NIKON AX-210

[. . . ] Flatbed Scanner ScanTouch 210 User's Manual Nikon ScanTouch 210 User's Manual i Cautions · · · The reproduction of all or part of this manual without our permission is prohibited. The information contained in this manual is subject to change without notice. We have made every effort to produce a perfect manual, but should you find any mistakes, we would be grateful if you would kindly let us know. We shall take no responsibility for consequences resulting from the operation of this product, despite the terms mentioned above. · Indication The indications in this manual signify important safety precautions. [. . . ] Do not store or use where: · The temperature is above 95°F (35°C) or below 50°F (10°C), the temperature changes drastically, or condensation occurs. Nikon ScanTouch 210 User's Manual 7 2. Before Operating the Scanner · · The humidity exceeds 85%. The unit is exposed to direct sunlight. · The atmosphere is excessively dusty. 8 Nikon ScanTouch 210 User's Manual 2. Before Operating the Scanner · · The unit may be subjected to excessive vibration. The unit is exposed to electrical noise and interference from other equipment nearby. · · When installing the scanner, allow plenty of space around and above the unit to ensure smooth operation. When placing the unit on a table, ensure that the unit does not stick off the edge. Nikon ScanTouch 210 User's Manual 9 2. Before Operating the Scanner 2. 5 Transportation Precaution When transporting the unit, lock the scanning carriage in place using the carriage lock, then pack the unit using the original packing material. If the original packing material is not available, be sure to pack it carefully, paying attention to possible vibrations or shocks that may affect the precision equipment during transportation. If transporting by air or delivery service, the scanner should be packed with particular care. Before securing the locking screw, first switch the unit on. Once the scanning carriage has automatically returned to its `home' position, (approximately 30 seconds after the unit is switched on), secure the locking screw. Scanning carriage (Home position) Movement of the carriage 10 Nikon ScanTouch 210 User's Manual 3. Parts Identification 3. 1 Inspection Inspect the package to see whether any damage has occurred during shipment. If there is any damage to the package, please contact your retailer directly and do not unpack the unit. 3. 2 Components When you open the package, check whether all the items are present. If there are any missing items, please contact your retailer immediately. Main body (1) Nikon ScanTouch 210 User's Manual 11 3. Parts Identification SCSI cable (1) (50-pin full-pitch 25-pin) Power cord (1) * The shape of the plug depends on the country of use. Terminator (1) User's manual(s) Software disk(s) 12 Nikon ScanTouch 210 User's Manual 3. Parts Identification 3. 3 Main Body A Closer Look Document Cover Document Setting Glass Indicator Panel Document Cover: Plastic cover over the document setting glass which can be raised and lowered over a document. Document Setting Glass: Glass surface on which the document or image should be placed. Indicator Panel: Contains Power, Option, and Ready indicators. When you turn the power on and the test is initiated, the indicators will flash once. The Power indicator will then come on and the Ready indicator will blink. When the test is completed, the Power and Ready (and Option if an option is connected) indicators will glow steadily. Nikon ScanTouch 210 User's Manual 13 3. Parts Identification Rear View 25-pin SCSI Connector Carriage Lock Power Switch AC Inlet Option Connector 50-pin SCSI Connector SCSI ID Selection Switch Carriage Lock: AC Inlet: Power Switch: When transporting the unit, fasten the screw to lock the carriage. [. . . ] Follow the above to the best of your ability. Excessive caution is not necessary, simply take reasonable care. Nikon ScanTouch 210 User's Manual 29 6. Maintenance 6. 2 Cleaning Regularly cleaning the document setting glass will ensure that dirt or smudges will not reduce the quality of your scanned images. Before you clean the glass, make sure the scanner is turned off and the power cord is unplugged. [. . . ]