User manual NIKON COOLPIX 4800

[. . . ] En The Nikon Guide to Digital Photography with the DIGITAL CAMERA Trademark Information Apple, the Apple logo, Macintosh, Mac OS, and QuickTime are registered trademarks of Apple Computer, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. The SD logo is a trademark of the SD Card Association. All other trade names mentioned in this manual or the other documentation provided with your Nikon product are trademarks or registered trademarks of their respective holders. For Your Safety To prevent damage to your Nikon product or injury to yourself or to others, read the following safety precautions in their entirety before using this equipment. [. . . ] Connect the white plug to the audio-in jack. 3 4 Tune the television to the video channel If in doubt, consult the documentation for your television or VCR. Turn the camera on Press the button for about a second to turn the camera on. The camera monitor will remain off and the television will show the image normally shown in the monitor. More on Playback PAL If PAL is selected for Video mode and the camera connected to a video device, video output will be suspended and the camera monitor or electronic viewfinder will turn on when the camera is in movie mode. 52 Viewing Pictures on a Computer Using the UC-E6 USB cable and PictureProject software provided with your camera, you can view your photographs and movies on a computer. Before you can transfer (copy) pictures to your computer, you will need to install PictureProject. For more information on installing PictureProject and transferring pictures to your computer, see the PictureProject Reference Manual (on CD) and the Quick Start Guide. Before Connecting the Camera Pictures can be copied from the camera to the computer by: · Pressing the center of the multi selector ( button) · Clicking the Transfer button in PictureProject Which method you will use depends on your computer's operating system and the USB option selected in the camera setup menu. After consulting the following table, select the appropriate option using the USB Center of multi selector ( button) item in the camera setup menu. The default option is Mass Storage. Pictures transferred using: Operating system Windows XP Home Edition Windows XP Professional Windows 2000 Professional Windows Millennium Edition (Me) Windows 98 Second Edition (SE) Mac OS X 10. 1. 5 or later Camera multi selector ( button) PictureProject Transfer button Choose Mass Storage or PTP. Choose Mass Storage. Choose Mass Storage or PTP. More on Playback Choose PTP. "Mass Storage" If Mass Storage is selected for USB, the center of the multi selector ( button) can not be used to transfer pictures from internal memory or from "locked" (write-protected) memory cards ( 11). 53 Choosing a USB Option 1 SET-UP Welcome screen Date Date imprint 1/4 2 SET-UP Format memory Language USB 3/4 Select SET UP mode. Highlight USB. 3 USB PTP Mass storage 4 USB PTP Mass storage Display USB menu. Highlight PTP or Mass Storage. Make selection. 5 USB PTP Mass storage More on Playback 54 Connecting the USB Cable Turn the computer on and wait for it to start up. After confirming that the camera is off, connect the UC-E6 USB cable as shown below. Connect the camera directly to the computer; do not connect the cable via a USB hub or keyboard. UC-E6 USB cable The lens will extend when the camera is turned on. Windows 2000 Professional, Windows Millennium Edition (Me), Windows 98 Second Edition (SE) Do NOT select PTP when connecting the camera to a computer running one of the above operating systems. If you have connected the camera to a computer running one of the above operating systems with PTP selected in the USB menu, disconnect the camera as described below. Be sure to select Mass Storage before reconnecting the camera. Windows 2000 Professional A dialog will be displayed welcoming you to the Found New Hardware Wizard. Click Cancel to close the dialog, and then disconnect the camera. Windows Millennium Edition (Me) After displaying a message stating that the hardware information database is being updated, the computer will start the Add New Hardware Wizard. Click Cancel to exit the wizard, and then disconnect the camera. Windows 98 Second Edition (SE) The Add New Hardware Wizard will be displayed. Click Cancel to exit the wizard, and then disconnect the camera. 55 More on Playback Disconnecting the Camera If PTP is selected in the USB menu, you can turn the camera off and disconnect the USB cable once transfer is complete. [. . . ] 42 (underexposed) · Exposure compensation is too low. · Subject is backlit: select scene mode setting of Back 35, 38 light or use fill flash. Pictures are too · Exposure compensation is too high. 42 bright (overexposed) Pictures are out of · Camera can not focus on selected subject using auto20 focus focus. [. . . ]