User manual NIKON COOLPIX 5200

[. . . ] En The Nikon Guide to Digital Photography with the DIGITAL CAMERA Trademark Information Apple, the Apple logo, Macintosh, Mac OS, Power Macintosh, PowerBook, and Quick Time are registered trademarks of Apple Computer, Inc. Finder, Power Mac, iMac, and iBook are trademarks of Apple Computer, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. Internet is a trademark of Digital Equipment Corporation. [. . . ] The confirmation dialog will be displayed. Press on the multi selector to highlight , and press . · No: Exit without deleting picture or voice memo · Yes: Delete both picture and voice memo More on Playback Play voice memo Change volume Delete voice memo 57 Storage Voice memo file names consist of an identifier ("DSCN" for memos appended to original pictures), a four-digit file number copied from the associated picture, and the extension ". WAV" (e. g. , "DSCN0015. WAV"). Notes on Voice Memos · Voice memos can not be recorded or played during thumbnail playback ( 53) and playback zoom ( 55). · Voice memos can not be recorded for movies ( 51). · If a voice memo already exists for the current picture, it must be deleted before a new memo can be recorded. · Do not touch the microphone during recording. More on Playback 58 Viewing Pictures on TV The EG-CP14 audio/video (A/V) cable provided with your camera can be used to connect the camera to a television or video-cassette recorder (VCR). Choosing Video Mode Video mode in the camera setup menu offers a choice of NTSC and PAL standards ( 121). Be sure that the standard selected matches that used in the device. 1 2 Turn the camera off Turn the camera off before connecting or disconnecting the A/V cable. Connect the A/V cable to the camera Open the interface connector cover and insert the black plug of the A/V cable into the camera's Audio/Video (A/V) out connector. More on Playback 3 4 5 Connect the A/V cable to the television or VCR Insert the yellow plug of the A/V cable into the video-in jack on your television or VCR and the white plug into the audio-in jack. Tune the television to the video channel For more information, see the manual for your television or VCR. Turn the camera on Press the button for at least two seconds to turn the camera on. The camera monitor will remain off and the television will display the image normally shown in the monitor. 59 Viewing Pictures on a Computer Using the UC-E6 USB cable and provided software with your camera, you can view your photographs and movies on a computer. Before you can transfer (copy) pictures to your computer, you will need to install provided software. For more information on installing provided software and transferring pictures to your computer, see the Quick Start Guide and the provided software Reference Manual (on CD). Before Connecting the Camera Pictures can be copied from the camera to the computer by: · Pressing the (Transfer ) button on the camera ( 3) · Clicking the Transfer button in provided software Which method you will use depends on your computer's operating system and the USB option selected in the camera setup menu. After consulting the following table, select the appropriate option using USB in the camera setup menu. The default setting is Mass storage. More on Playback (Transfer ) button Operating system Windows XP Home Edition Windows XP Professional Windows 2000 Professional Windows Millennium Edition (Me) Windows 98 Second Edition (SE) Mac OS X (10. 1. 5 or later) Pictures transferred using: Camera Provided soft(Transfer ) ware Transfer button button Choose Mass storage or PTP. Choose Mass storage or PTP. The Write Protect Switch The camera (Transfer ) button can not be used to transfer pictures when the memory card write protect switch is in the lock position ( 11). 60 Choosing a USB Option Select mode. Highlight USB and press . Select PTP or Mass storage, and press . More on Playback 61 Connecting the USB Cable Turn the computer on and wait for it to start up. After confirming that the camera is off, connect the UC-E6 USB cable (provided with your camera) as shown below. Connect the camera directly to the computer; do not connect the cable via a USB hub or keyboard. UC-E6 USB cable More on Playback You can now turn the camera on and transfer pictures. See the Quick Start Guide for details. Windows 2000 Professional, Windows Millennium Edition (Me), Windows 98 Second Edition (SE) Do not select PTP when connecting the camera to a computer running one of the above operating systems. If you have connected the camera to a computer running one of the above operating systems with PTP selected in USB, disconnect the camera as described below. [. . . ] No picture is Message "CARD IS NOT FORMATTED" appears in monitaken when shuttor: memory card is not formatted for use in camera. ter-release button · Message "MEMORY CARD IS WRITE PROTECTED" is pressed appears in monitor: memory card is locked. · Message "OUT OF MEMORY" appears in monitor: insufficient memory to record picture at current Image quality/size setting. Pictures are too dark (underexposed) Pictures are too bright (overexposed) Pictures are out of focus · · · · Flash is off. [. . . ]