User manual NIKON COOLPIX 7900

[. . . ] En The Nikon Guide to Digital Photography with the DIGITAL CAMERA Trademark Information Apple, the Apple logo, Macintosh, Mac OS, and Quick Time are registered trademarks of Apple Computer, Inc. Finder is trademark of Apple Computer, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. Internet is a trademark of Digital Equipment Corporation. [. . . ] After confirming that the camera is off, connect the UC-E6 USB cable (provided with your camera) as shown below. Check to be sure the connector is in the correct orientation and insert the plug straight. Do not insert or disconnect it forcibly. Connect the camera directly to the computer; do not connect the cable via a USB hub or keyboard. More on Playback UC-E6 USB cable You can now turn the camera on. The lens will extend when the camera is turned on. Windows 2000 Professional, Windows Millennium Edition (Me), Windows 98 Second Edition (SE) Do not select PTP when connecting the camera to a computer running one of the above operating systems. If you have connected the camera to a computer running one of the above operating systems with PTP selected in USB, disconnect the camera as described below. Be sure to select Mass storage before reconnecting the camera. Windows 2000 Professional A dialog will be displayed welcoming you to the Found New Hardware Wizard. Click Cancel to close the dialog, and then disconnect the camera. Windows Millennium Edition (Me) After displaying a message stating that the hardware information database is being updated, the computer will start the Add New Hardware Wizard. Click Cancel to exit the wizard, and then disconnect the camera. Windows 98 Second Edition (SE) The Add New Hardware Wizard will be displayed. Click Cancel to exit the wizard, and then disconnect the camera. 67 Transferring Pictures When the PictureProject Transfer is displayed in the computer monitor, pressing the (Transfer ) Button on the camera or clicking the Transfer button in PictureProject will transfer pictures to the computer. For information on using PictureProject, see the Quick Start Guide or the PictureProject Reference Manual (on CD). To Transfer Pictures Using (Transfer ) Button When the PictureProject Transfer is displayed in the computer monitor, press the (Transfer ) Button on the camera. Pictures marked with an icon ( 110, 133) will be transferred. When the (Transfer ) Button is pressed, the transfer will start and the following messages will be displayed in the camera monitor. PREPARING TO TRANSFER TRANSFERRING IMAGES TO COMPUTER TRANSFER COMPLETED More on Playback During Transfer While transfer is in progress, do not: · · · · Disconnect the USB cable Turn the camera off Remove the battery or the memory card Disconnect the AC adapter kit Failure to observe this precaution could interfere with normal functioning of both the camera and the computer. Transferring Pictures Stored in the Memory · Remove the memory card from the camera before connecting the camera to the computer. · When transferring pictures with the camera (Transfer ) Button, note the following. ­ For Windows XP or Mac OS X (10. 1. 5 or later), set the USB option in the Set-up menu to PTP. ­ For Windows 2000, Windows Me or Windows 98SE, the camera (Transfer ) Button cannot be used. Use the Transfer button in PictureProject, or copy the pictures in the memory to the memory card ( 113) and then transfer the pictures to the computer. Using Mac OS X (10. 1. 5 or Later) Before using the (Transfer ) Button on the camera to transfer pictures, set the USB option in the Set-up menu to PTP. [. . . ] Exposure compensation is too low. 44 21 45 49 49 99 23 126 · Exposure compensation is too high. · Subject was not in focus area when Shutter-release Button was pressed halfway. · Green (AF) Lamp flashes: camera unable to focus. · AF-assist illuminator does not light when the lighting is poor. [. . . ]