User manual NIKON D4S

[. . . ] No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION. DIGITAL CAMERA User's Manual Nikon User Support Visit the site below to register your camera and keep up-to-date with the latest product information. You will find answers to frequently asked questions (FAQs) and can contact us for technical assistance. http://www. europe-nikon. com/support Nikon Manual Viewer 2 Use the Nikon Manual Viewer 2 app to view manuals anytime, anywhere on your smartphone or tablet. AMA15947 Printed in Europe En SB4B01(11) 6MB20711-01 En To get the most from your camera, please be sure to read all instructions thoroughly and keep them where they will be read by all those who use the product. Symbols and Conventions To make it easier to find the information you need, the following symbols and conventions are used: D A 0 This icon marks cautions; information that should be read before use to prevent damage to the camera. [. . . ] For example, the voice memo for the image “DSC_0002. JPG” would have the file name “DSC_0002. WAV. ” Voice memo file names can be viewed on a computer. A e 265 Playing Voice Memos Voice memos can be played back over the camera’s built-in speaker when the associated image is viewed in full-frame playback or highlighted in the thumbnail list (0 241). The presence of a voice memo is indicated by an h icon. To Start/end playback Delete voice memo Press Description Press H to start playback. Playback will end when H button is pressed again or entire memo has been played back. See page 258. H O e A Interrupting Playback Pressing the shutter-release button or operating other camera controls may end playback. Playback ends automatically when another image is selected or the camera is turned off. 266 Voice Memo Playback Options The Voice memo options > Audio output item in the setup menu controls whether voice memos are played back by the camera (from either the built-in speaker or optional headphones) or by a device to which the camera is connected via an HDMI cable. When sound is played back by the camera, the Audio output option also controls playback volume. Description Voice memos are played back over built-in speaker or (if connected) over optional headphones. Selecting this Speaker/ % option displays menu shown headphones at right. Beep will sound when option is selected. Press J to make selection and return to setup menu. & HDMI Audio signal output to HDMI terminal. b icon is ( Off displayed when photo for which voice memo exists is viewed in monitor. Option e 267 e 268 Q Connections Installing ViewNX 2 Install the supplied ViewNX 2TM software to display and edit photographs and movies that have been copied to your computer. Before installing Your Imaging Toolbox ViewNX 2, confirm that your computer meets the system requirements on page 271. Be sure to use the latest version of ViewNX 2, which is available for download from the websites listed on page xx, as earlier versions that do not support the D4S may fail to transfer NEF (RAW) images correctly. 1 Launch the installer. q Select region (if required) Start the computer, w Select language insert the installer CD, and launch the installer. A language e Click Next selection dialog will be displayed. If the desired language is not available, click Region Selection to choose a different region (region selection is not available in the European release). Q 269 2 Start the installer. Click Install and follow the onscreen instructions. Click Install 3 Exit the installer. Windows Mac Click Yes Click OK 4 Remove the installer CD from the CD-ROM drive. Q 270 A Viewing the Nikon Website To visit the Nikon website after installing ViewNX 2, select All Programs > Link to Nikon from the Windows start menu (Internet connection required). A System Requirements Windows Mac • Photos: Intel Celeron, • Photos: Intel Core or Xeon Pentium 4, or Core series, series 1. 6 GHz or better • Movies (playback): Core Duo • Movies (playback): Pentium D 2 GHz or better; Intel Core i5 3. 0 GHz or better; Intel Core i5 or better recommended when or better recommended when viewing movies with a frame CPU viewing movies with a frame size of 1280 × 720 or more at a size of 1280 × 720 or more at a frame rate of 30 fps or above frame rate of 30 fps or above or movies with a frame size of or movies with a frame size of 1920 × 1080 or more 1920 × 1080 or more • Movies (editing): Intel Core i5 or • Movies (editing): Intel Core i5 or better better Pre-installed versions of Windows 8. 1, Windows 7, Windows Vista, and OS OS X 10. 9, 10. 8, or 10. 7 Windows XP; note that 64-bit versions of Windows XP are not supported • 32-bit Windows 8. 1, Windows 7, or Windows Vista: 1 GB or more (2 GB or more recommended) Memory • 64-bit Windows 8. 1, Windows 7, or 2 GB or more (4 GB or more (RAM) Windows Vista: 2 GB or more recommended) (4 GB or more recommended) • Windows XP: 512 MB or more (2 GB or more recommended) Hard disk A minimum of 1 GB available on the startup disk (3 GB or more space recommended) Resolution: 1024 × 768 pixels Resolution: 1024 × 768 pixels (XGA) or more (1280 × 1024 pixels or (XGA) or more (1280 × 1024 pixels or Graphics more recommended) more recommended) Color: 24-bit color (True Color) or Color: 24-bit color (millions of colors) more or more See the websites listed on page xx for the latest information on supported operating systems. Q 271 Using ViewNX 2 Copy Pictures to the Computer Before proceeding, be sure you have installed the software on the supplied ViewNX 2 CD (0 269). 1 Connect the USB cable. After turning the camera off and ensuring that a memory card is inserted, connect the supplied USB cable as shown and then turn the camera on. A A Use a Reliable Power Source To ensure that data transfer is not interrupted, be sure the camera battery is fully charged. Connecting Cables Be sure the camera is off when connecting or disconnecting interface cables. Do not use force or attempt to insert the connectors at an angle. D During Transfer Do not turn the camera off or disconnect the USB cable while transfer is in progress. Q 272 D The USB Cable Clip To prevent cable from being disconnected, attach the supplied clip as shown. A USB Hubs Connect the camera directly to the computer; do not connect the cable via a USB hub or keyboard. 2 Start Nikon Transfer 2 component of ViewNX 2. If a message is displayed prompting you to choose a program, select Nikon Transfer 2. A Windows 7 If the following dialog is displayed, select Nikon Transfer 2 as described below. 1 Under Import pictures and videos, click Change program. A program selection dialog will be displayed; select Import file using Nikon Transfer 2 and click OK. 2 Double-click Import file. Q 273 3 Click Start Transfer. At default settings, pictures on the memory card will be copied to the computer. Start Transfer 4 Terminate the connection. When transfer is complete, turn the camera off and disconnect the USB cable. Q 274 View Pictures Pictures are displayed in ViewNX 2 when transfer is complete. A Starting ViewNX 2 Manually • Windows: Double-click the ViewNX 2 shortcut on the desktop. • Mac: Click the ViewNX 2 icon in the Dock. ❚❚ Retouching Photographs To crop pictures and perform such tasks as adjusting sharpness and tone levels, click the Edit button in the ViewNX 2 toolbar. ❚❚ Editing Movies To perform such tasks as trimming unwanted footage from movies shot with the camera, click the Movie Editor button in the ViewNX 2 toolbar. ❚❚ Printing Pictures Click the Print button in the ViewNX 2 toolbar. [. . . ] 276, 409 WT-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276, 409 WT-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276, 409 X XQD card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32, 96, 462 XQD card slot. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]