User manual NIKON E4800

[. . . ] For Your Safety To prevent damage to your Nikon product or injury to yourself or to others, read the following safety precautions in their entirety before using this equipment. Keep these safety instructions where all those who use the product will read them. The consequences that could result from failure to observe the precautions listed in this section are indicated by the following symbol: This icon marks warnings, information that should be read before using this Nikon product to prevent possible injury. WARNINGS Do not look at the sun through the viewfinder Viewing the sun or other strong light source through the viewfinder could cause permanent visual impairment. Turn off immediately in the event of malfunction Should you notice smoke or an unusual smell coming from the equipment or from the AC adapter (available separately), unplug the AC adapter and remove the battery immediately, taking care to avoid burns. [. . . ] · Select Yes to delete both picture and Erase 1 image (s)?voice memo · Select to delete voice memo only No · Select No to exit without deleting picture or voice memo Yes More on Playback More on Playback Voice Memos Voice memo file names have the same identifier and four-digit file number as the associated picture, followed by the extension ". WAV" (e. g. , "DSCN0015. WAV"). 51 $00_Q02145_En 50-51 2004. 6. 1, 4:15:48 PM Viewing Pictures on TV The EG-CP14 audio / video (A / V) cable included with the camera can be used to connect the camera to a television or video-cassette recorder (VCR). Choosing a Video Mode The Video mode item in the setup menu offers a choice of NTSC and PAL ( 99). Be sure that the mode selected matches the standard used in the video device. Viewing Pictures on a Computer Using the UC-E6 USB cable and PictureProject software provided with your camera, you can view your photographs and movies on a computer. Before you can transfer (copy) pictures to your computer, you will need to install PictureProject. For more information on installing PictureProject and transferring pictures to your computer, see the PictureProject Reference Manual (on CD) and the Quick Start Guide. 1 2 Turn the camera off Turn the camera off before connecting or disconnecting the A / V cable. Connect the A / V cable Open the interface connector cover as shown at right and insert the black plug into the camera's interface connector. Insert the yellow plug into the video-in jack on the television or VCR. Connect the white plug to the audio-in jack. Before Connecting the Camera Pictures can be copied from the camera to the computer by: button) · Pressing the center of the multi selector ( · Clicking the Transfer button in PictureProject Which method you will use depends on your computer's operating system and the USB option selected in the camera setup menu. After consulting the following table, select the appropriate option using the USB Center of multi selector ( button) item in the camera setup menu. The default option is Mass Storage. Pictures transferred using: Operating system Windows XP Home Edition Windows XP Professional Windows 2000 Professional Windows Millennium Edition (Me) Windows 98 Second Edition (SE) Mac OS X 10. 1. 5 or later Camera multi selector button) ( PictureProject Transfer button Choose Mass Storage or PTP. Choose Mass Storage. Choose Mass Storage or PTP. More on Playback 3 4 Tune the television to the video channel If in doubt, consult the documentation for your television or VCR. Turn the camera on Press the button for about a second to turn the camera on. The camera monitor will remain off and the television will show the image normally shown in the monitor. More on Playback Choose PTP. PAL If PAL is selected for Video mode and the camera connected to a video device, video output will be suspended and the camera monitor or electronic viewfinder will turn on when the camera is in movie mode. 52 "Mass Storage" If Mass Storage is selected for USB, the center of the multi selector ( button) can not be used to transfer pictures from internal memory or from "locked" (write-protected) memory cards ( 11). 53 $00_Q02145_En 52-53 2004. 6. 1, 4:16:07 PM Choosing a USB Option Connecting the USB Cable 1/4 1 SET-UP Welcome screen Date Date imprint 2 SET-UP Format memory Language USB 3/4 Turn the computer on and wait for it to start up. After confirming that the camera is off, connect the UC-E6 USB cable as shown below. Connect the camera directly to the computer; do not connect the cable via a USB hub or keyboard. Select SET UP mode. Highlight USB. 3 USB PTP Mass storage 4 USB PTP UC-E6 USB cable Mass storage The lens will extend when the camera is turned on. Display USB menu. Make selection. 5 USB PTP Mass storage Windows 2000 Professional, Windows Millennium Edition (Me), Windows 98 Second Edition (SE) Do NOT select PTP when connecting the camera to a computer running one of the above operating systems. If you have connected the camera to a computer running one of the above operating systems with PTP selected in the USB menu, disconnect the camera as described below. Be sure to select Mass Storage before reconnecting the camera. [. . . ] when shutter-release · Message "OUT OF MEMORY" is displayed: insufficient 65 button is pressed memory to record picture at current Image mode setting. · Message "MEMORY CARD IS WRITE PROTECTED" is 11 displayed: memory card is locked. 39 Pictures are too dark · Subject is outside range of flash. 42 · Exposure compensation is too low. [. . . ]