User manual NIKON EH-31

[. . . ] 2 Open the door which covers the DC IN connector and insert the power jack into the DC IN connector. Caution: The power jack must be fully inserted in the DC IN connector. 3 Plug the power cable into a power outlet. You are now ready to turn the camera on. [. . . ] Forcibly cutting power to the camera when in these circumstances could result in loss of data or in damage to the camera's internal memory. Note: Shape of cable depends on country of use. Federal Communications Commission (FCC) Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. consult the dealer or an experienced radio/television technician for help. CAUTIONS Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Nikon Corporation may void the user's authority to operate the equipment. Interface Cables Use the interface cables sold or provided by Nikon for your equipment. Using other interface cables may exceed the limits of Class B Part 15 of the FCC rules. Cautions Improper use of the EH-31 could result in fire or electric shock. Use should be accompanied by the following precautions. â· Be sure to use a voltage appropriate to the cable provided with your adapter. Should you notice smoke or an unusual smell or noise coming from the adapter, immediately turn the camera off and then unplug the power cable from the power source. After confirming that the adapter is no longer smoking, take it to a Nikon-authorized service center for inspection. Be careful not to damage the power cable's protective insulation. Do not cut or abrade the cable, expose the cable to heat or flame, or place heavy objects on the cable. When removing the cable from a power outlet, pull on the plug; never pull directly on the cable itself. Should the cable be damaged, return it to your retailer for a replacement. [. . . ] Reproduction, in whole or in part, of any of the manuals provided with your Nikon product requires prior permission from Nikon. â· The information contained in these manuals is subject to change without notice. â· While Nikon has made every effort to produce perfect manuals, we appreciate any opportunity for improvement. Should you find any mistakes, we would be grateful if you were to kindly let us know. [. . . ]