User manual NIKON SUPER COOLSCAN 800 ED

[. . . ] En Setup Device Registration (Windows Only) Scanning Film Holders for the 8000 ED Nikon Scan Reference User's Manual Install Nikon Scan scanner driver software The procedure for installing the software differs depending on whether you are using a Windows or Macintosh computer. Windows Macintosh See See 16 21 Scanning Guide Set up the scanner and connect it to your computer Windows users will need to register the scanner with Windows when connecting the scanner for the first time. Registration of the scanner as a new device is necessary only under Windows. Connect the scanner See Register the scanner See 25 27 Place the film to be scanned in a film holder Different holders are used for different types of film. [. . . ] If the Add New Hardware Wizard is displayed If the dialog shown at right is displayed, click Next and proceed to step 3b. If no message is displayed If no message is displayed after sixty seconds, proceed to "Updating the Device Driver (Windows 98 SE)" ( 53). 3a Locate "ntmap. sys" right will be disThe dialog shown at played. Click Browse. 48 Navigate to "C:\windows\system32\ drivers" by selecting "C:" from the list of drives and double-clicking in turn on each of the following folders: "windows", "system32", and "drivers. " "ntmap. sys" will be selected in the list of files. Click OK and confirm that the scanner has been correctly registered with the system as described in "Confirming Device Registration (Windows 98 SE)" ( 51). 3 CD 3b Insert the Nikon Scanright will be disThe dialog shown at played. Holding down the shift key to prevent the Welcome program from starting automatically, insert the Nikon Scan 3 CD into the CD-ROM drive, then select the search option and click Next. The Welcome Window If the Welcome program starts automatically when you insert the Nikon Scan CD, click Exit to close the Welcome window. 4 Select Specify a location Select Specify a location and click Browse. The Welcome Window If the Welcome program starts automatically when you insert the Nikon Scan CD, click Exit to close the Welcome window. 49 5 Select the Win98SE folder The Browse for Folder dialog will be displayed. Select the "Win98SE" folder under "Nkscan" > "INF" > "Ls8000" and click OK. 6 Confirm the file path The dialog shown at right will be displayed. Confirm that the path "\INF\LS8000\Win98SE" appears after the drive letter of the CD-ROM drive and click Next. If the Correct Path Is Not Displayed If the correct path is not displayed, repeat steps 4­6 to select the correct path. 7 Begin installation of the device drivers Click Next. 8 Click Finish Click Finish to complete installation. 9 Confirm device registration Confirm that the scanner has been correctly registered with the system as described in "Confirming Device Registration (Windows 98 SE)" ( 51). 50 Confirming Device Registration (Windows 98 SE) After registering the scanner, confirm that the device is working normally as described below. 1 2 3 Turn the scanner on Make sure that the scanner is connected and turned on. Open the System Properties dialog From the Start menu, select Settings > Control Panel and double-click the System icon. Display the Device Manager The System Properties dialog will be displayed. Open the Device Manager tab. 4 Confirm that the scanner is listed under "Imaging Device" If "Imaging Device" appears in the Device Manager, click the "+" to its left to view the imaging devices currently registered with Windows. If the Scanner Is Not Listed If your scanner is not listed under "Imaging Device, " proceed to "Updating the Device Driver (Windows 98 SE)" ( 53). 51 5 Confirm that the scanner is working properly Double-click the listing for your scanner that appears under "Imaging Device. " The scanner Properties dialog will be displayed. Click the General tab and confirm that "This device is working properly" appears under "Device Status. " If another message is displayed, proceed to "Updating the Device Driver (Windows 98 SE)" ( 53). 52 Updating the Device Driver (Windows 98 SE) If the scanner is not listed under "Imaging Device" in the Device Manager or the message "This device is working properly" does not appear in the Properties dialog, you will need to reinstall the device driver as detailed below. 1 2 3 Open the scanner Properties dialog Display the Device Manager as described in steps 1­3 of "Confirming Device Registration 51). If the scanner is listed under "Other devices" or appears next (Windows 98 SE)" ( to a "!", "?", or "×", double-click the entry for the scanner to display the scanner Properties dialog. Open the Driver tab and click Reinstall Driver. . . . Click Next When the Update Device Driver wizard is displayed, click Next. 4 Select the search option Select the search option and click Next. 5 Insert the Nikon Scan 3 CD The dialog shown at right will be displayed. Holding down the shift key to prevent the Welcome program from starting automatically, insert the Nikon Scan 3 CD into the CD-ROM drive, then select Specify a location and click Browse. The Welcome Window If the Welcome program starts automatically when you insert the Nikon Scan CD, click Exit to close the Welcome window. 53 6 Select the Win98SE folder The Browse for Folder dialog will be displayed. Select the "Win98SE" folder under "Nkscan" > "INF" > "Ls8000" and click OK to return to the dialog shown in step 5. Confirm that the path "\INF\ LS8000\Win98SE" appears after the drive letter of the CD-ROM drive and click Next. 7 Begin installation of the device drivers A dialog will be displayed stating that Windows has found the drivers for the device. [. . . ] 6 connecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Settings menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]