User manual NILFISK BACKVACUUM XP

[. . . ] Before using the vacuum cleaner, the operators must be informed, instructed and trained on how to work it and for which substances its usage is permitted including the safe method for removing and disposing of the vacuumed material. The use of vacuum cleaner by people (including children) with limited physical and mental capacities or lacking in experience and knowledge is strictly forbidden, unless they are supervised by a person who is experienced in the use and safe handling of the machine. Children must be supervised to make sure they will not play with the vacuum cleaner. Use the vacuum cleaner in accordance with the laws in force in the country where it is used. [. . . ] If an extension cable is used, make sure it is suitable for the power input and protection degree of the vacuum cleaner. Never spray water on the vacuum cleaner: this could be dangerous for persons exposed and could short circuit the power supply. The vacuum cleaner's power socket must be protected by a differential circuit-breaker with surge current limitation, that shuts off the power supply when the current discharged to the ground exceeds 30 mA for 30 msec. Setting to work - connection to the power supply wARNING!Make sure there is no evident sign of damage to the vacuum cleaner before starting work. Before plugging the vacuum cleaner into the electrical mains, make sure the voltage rating indicated on the data plate corresponds to that of the electrical mains. Plug the vacuum cleaner into a socket with a correctly installed ground contact/connection. Make sure that the vacuum cleaner is turned off. The plugs and connectors of the connection cables must be protected against splashes of water. Make sure that connections to the electrical mains and plug are correct. Use the vacuum cleaners only when the cables that connect to the electrical mains are in perfect condition (damaged cables could lead to electric shocks!Lock the castor brakes (1) before starting the vacuum cleaner. Turn the switch to "0" position to turn the vacuum cleaner off. The air speed in the suction tube must not be less than 20 m/s. Before emptying the container it is advisable to clean the filter (see "Primary filter shaker"). Make sure the seal is in perfect condition and correctly positioned. You can use the plastic bags supplied by our sales network (Fig. A wet filter element can quickly become clogged if the vacuum cleaner is then used to vacuum dry substances. For this reason, make sure that the filter element is dry or replace it with another one before using the vacuum cleaner for dry materials. Turn the vacuum cleaner off with switch (1 - Fig. Wash the container with clean water if aggressive substances have been vacuumed. Store the vacuum cleaner in a dry place, out of reach of unauthorised persons. [. . . ] Release the clamps and detach the cage from the filter. dispose of the filter according to the laws in force. Fit the new filter and secure it in the cage with special clamps. Take care not to raise dust when this operation is carried out. [. . . ]