User manual NILFISK CONTRACTOR

[. . . ] CONTRACTOR DIESEL Instruktionsbog . . . . . . . . . . . . . . . . . . . . . . . . Instruksjonsbok . . . . . . . . . . . . . . . . . . . . . . . . Instruktionsbok. . . . . . . . . . . . . . . . . . . . . . . . . Manual d'Instructions . . . . . . . . . . . . . . . [. . . ] The machine is supplied as standard without detergent injection equipment. In self priming mode, detergents must not be added to the feed water (pos. 1), and thereby circulated through the pump. If your work requires detergents, they may be added through the optional external (downstream) injector available from your Nilfisk-ALTO supplier. Certain organic solvents are aggressive to rubber and plastics used in high pressure hoses and must therefore not be used. Using detergents outside the range from 4. 0 - 10. 0 pH, will result in a loss of working life for your high pressure hose and seals in the spray handle, lances and other accessory. Follow precisely the directions printed on the packing when using detergents. 8. 3 Water connection The water inlet connection is at the front of the machine, on the pump (pos. Before connecting the water supply hose, it should be flushed to remove any impurities. The machine can be connected directly to a pressurized water supply or a tank. The inlet pressure must not exceed 15 bar (218 psi) and the water temperature must not exceed 35°C (95F°) . When the machine is connected to a water supply with back-flowpreventer the water supply hose must be at least 6 m (20 ft) in length. If there are impurities in the water source, it is advisable to provide additional filtration in the inlet line. Ask your Nilfisk-ALTO representative about the filters and filters available for your CONTRACTOR. 8. 6 Fuel for burner Use ONLY "heating oil", kerosene or diesel fuel in the "Jerry-can" fuel tank for the burner. DO NOT put gasoline in the burner fuel can! 8. 7 Fuel for engine Use only clean auto-diesel for the Ruggerini engine. 43 9. 0 Operating instructions 9. 1 Start-up procedure 1. Check that the pump oil level is between the MIN. Check the oil level on the Ruggerini engine. Oil type: Choose oil type in accordance with the instructions in the Ruggerini manual. Run water through the inlet hose before connecting in order to remove possible impurities in the hose. Any water supply valve must be fully open in order to provide sufficient water supply. Open the small venting cap on the "Jerry-can" if you intend to operate in hot water or steam mode. Start the Ruggerini engine as described in the enclosed operating instructions. The key for the electric start has the following 3 positions: 1 "0" off 2 "I" run 3 the startkey will return to position 2 when released. [. . . ] Sintra Business Park Zona Industrial Da Abrunheira Edificio 1, 1° A P2710-089 Sintra Tel. : +35 808 200 537 Fax: +35 121 911 2679 E-mail: mkt@nilfisk-advance. es http://www. nilfisk-alto. com HEAD QUARTER DENMARK Nilfisk-Advance Group Sognevej 25 DK-2605 Brøndby Tel. : (+45) 4323 8100 Fax: (+45) 4343 7700 E-mail: mail. com@nilfisk-advance. com Nilfisk-ALTO ALTO France SAS Aéroparc 1 19 rue Icare 67960 Entzheim Tel. : (+33) 3 88 28 84 00 Fax: (+33) 3 88 30 05 00 E-mail: info. fr@nilfisk-alto. com GERMANY Nilfisk-ALTO Division of Nilfisk Advance Guido-Oberdorfer-Str. 10 89287 Bellenberg Tel. : (+49) (0) 180 5 37 37 37 E-mail: info. de@nilfisk-alto. com RUSSIA SALES COMPANIES ARGENTINA Nilfisk-Advance srl. Edificio Central Park Herrera 1855, Office 604 Ciudad Autónoma de Buenos Aires Tel. : (+54) 11 6091 1571 Fax:(+54) 11 6091 1575 GREECE Nilfisk-Advance SA 8, Thoukididou str. 164 52 Argiroupolis Tel. : +30 210 96 33443 Fax: +30 210 96 52187 E-mail: nilfisk-advance@clean. gr - 127015 . [. . . ]