User manual NILFISK FILTRA VACS

[. . . ] Use the cleaner only when the mains lead is in a good and safe condition. The following materials must not be picked up with the cleaner: _ Hot materials (glowing cigarettes, hot ashes, etc. APPLIANCE PLUG SOCKET Before connecting any appliance to the appliance plug socket, the cleaner must always be switched off. DURING OPERATION Take care not to damage the mains lead (e. [. . . ] Before all maintenance operations, cleaning, filter changes and after use, switch off the cleaner and remove the mains plug!Never point nozzles and/or tube ends at eyes or ears. The cleaner is only to be used for dry cleaning - not for picking up liquids or for cleaning outdoors. Humans and animals must not be cleaned with the cleaner. The manufacturer accepts no liability for any damage or injury arising from any unintended use or incorrect operation. Do not expose the cleaner to the weather, to moisture or to direct sources of heat. Clean the cleaner only dry or with a slightly damp cloth. the electrical parts (switches , plug , plug socket , electronics , etc. ) must not be allowed to come into contact with water. DISPOSAL INSTRUCTIONS Do not simply throw away the cleaner packaging, the full filters and later the cleaner when no longer serviceable. Dispose of everything in accordance with the guidelines laid down by the local authority or the responsible waste disposal company. Dispose of the packaging materials separately according to material types in the containers provided for their collection so that they can be recycled. When the cleaner can no longer be used, make it unserviceable immediately and take to the appropriate collection point for old appliances. ASSEMBLING THE ACCESSORIES The flexible suction hose has two different connectors (1 hand tube with suction force controller, 1 hose connector). Push the extension onto the hand tube with the suction force controller (Fig. 8) Press the pedal down with your foot and tilt the handle. Please note: The floor brush is switched off when the cleaner is upright and when the extension tube is removed. When the extension tube is fitted again, it must engage correctly otherwise the floor brush will remain switched off. Secure the suction unit with the two star-head bolts supplied. Push the holder for the crevice nozzle onto the handle. 7) 1 = Push the mounting onto the suction unit and press the suction hose into the guide on the rear of the suction unit. 2 = Press the extension tube into the 3 = guide on the rear of the suction unit. [. . . ] I = Cam for new brush roller II = Cam for partly worn brush roller Fit and lock the baseplate, ensuring that the retaining cams of the baseplate engage on the front edge of the housing (Fig. Clean the cleaner only dry or with a damp cloth. The filter chamber should also be cleaned with a damp cloth, when necessary. Remove the brush roller from the floor brush. [. . . ]