User manual NILFISK GD 111

[. . . ] Before using the vacuum cleaner make sure that the voltage shown on the rating plate on the vacuum cleaner corresponds with the main voltage. The vacuum cleaner must not be used for picking up hazardous materials - i. [. . . ] If this becomes damaged, it should be repaired only by Nilfisk or an authorised Nilfisk Service Dealer. ⷠDo not handle the electrical cable or plug with wet hands. The plug must always be removed from the socket outlet before starting any service or repair work of the machine or the cable. ⷠNo changes to the mechanical, electrical or thermal safety devices must be made. ⷠThis appliance is not to be used by children or persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction. ⷠYoung children should be supervised to ensure that they do not play with the appliance. This machine is equipped with a thermal cut-out to protect the motor and other vital machine parts from overheating. Should the machine cut out, you will have to wait at least 5-10 minutes for it to automatically reset. While you are waiting, switch the machine off and unplug it, then check the hose, dust bag and filters to be sure that nothing is blocking the flow of air through the machine. the cleaner is designed for continuous heavy work. Depending on the number of running hours ­ the dust filters should be renewed. Keep the container clean with a dry cloth, and a small amount of spray polish. [. . . ] For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. Suction power, with hose + tube (W) Noise level, maximally IEC 60 704-2-1, dB(A) BS 5415, dB(A) 200 72 54 Specifications and details are subject to change without prior notice. [. . . ]