User manual NILFISK GD 930

[. . . ] â· The use of this machine in conjunction with the pick-up of hazardous materials (such as asbestos) has not been investigated by Underwriters laboratories Inc. This appliance is provided with double insulation. To reduce the risk of fire, electric shock, or injury, please read and follow all safety instructions and caution markings before use. This vacuum cleaner is designed to be safe when used to for cleaning functions as specified. [. . . ] The machine is also fitted with a backup filter (d) located above the motor. This filter should also be inspected and replaced if necessary. The GD 930/S2 is equipped with a specially designed cable, which if damaged, must be replaced by a cable of the same type. These cables are avaible at authorized service shops and must be installed by trained personnel. The GD 930/S2 is equipped with a thermal cut-out to protect the motor and other vital machine parts from overheating. Should the machine cut out, you will have to wait at least 5-10 minutes for it to automatically reset. While you are waiting, switch the machine off and unplug it, then check the hose, dust bag and filters to be sure that nothing is blocking the flow of air through the machine. Push the hose coupling all the way in and turn clockwise. Standard: Fit the sections together and twist to lock in place. Telescopic: Push down the catch and then adjust the length. The accessories shown in the pictures may vary from model to model. A-b)Combination nozzle Adjust the nozzle according to the requirements of the floor you are cleaning. Work with the brush on hard floors and without it on soft floors. c) Universal nozzle for both hard floors and carpets. D)Crevice nozzle Use to clean furniture, radiators and others hard-to-reach places. E)Small combi-nozzle: The small combi-nozzle combines a dusting brush for furniture, picture frames, mouldings etc. With a fold-out nozzle for cleaning curtains, furniture and other soft surfaces. The clip on the hose handle holds the nozzle when it is not in use. The suction control in the hose handle lets you regulate the air-flow to prevent the nozzles from fastening to the surfaces you are vacuum cleaning. Remove the plug from the socket before performing service or maintenance. The symbol on the product or on its packing indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. [. . . ] The wire which is coloured blue must be connected to the terminal in the plug which is marked with the letter 'N' or is coloured black or blue. The wire which is coloured brown must be connected to the terminal in the plug which is marked with the letter 'L' or is coloured red or brown. If the plug to be fitted does not conform to the above notation then consult a qualified electrician. To connect the new plug: If using a three-pin plug, do not make any connection to the the terminal in the plug which is marked with the letter `E' or by the safety earth symbol or coloured green or green & yellow. [. . . ]