User manual NILFISK GWD 375

[. . . ] The accessories shown in the pictures may vary on different models. De hulpstukken op de afbeeldingen kunnen van model tot model variëren. To reduce the risk of fire, electric shock, or injury, please read and follow all safety instructions and caution markings before use. This vacuum cleaner is designed to be safe when used for cleaning functions as specified. [. . . ] Place the drain hose end near a floor drain and then remove the plug at hose end. The natural pressure will then drain the liquids from the container. 2g) Emptying from the container: Pull the upper parts of the latches outwards and release the motor top. The suction hose can be attached during emptying from the container. Grasp with one hand at the handle at the lower part of the container. to avoid movement of the trolley - place one foot at the basepart of the trolley. Then tilt the container backwards and pour the liquids into a floor drain or similar. Make sure that the switch/ switches is located in direction towards the suction inlet. Then connect the suction hose into the suction inlet at the machine by pushing the hose forward until it snaps in place at the inlet (to release the hose from machine just push the release button downwards and then pull out the hose). Then connect the two tubes with the hose handle, twist the tubes in order to ensure that they are properly fitted. Choose nozzle depending on what type of material that is to be picked-up. Connect the plug into a proper electrical outlet. Put the electrical switch into position 1 in order to start the motor. Some variants have two motors/fan units and two electrical switches - one switch for each motor. The handle can be adjusted to the suitable working heigth. Start by loosing the two locking screws at each side of the handle. Then adjust the handle by moving it upwards or downwards until the proper angle is found. Tighten the both locking screws again to secure the handle The machine is equipped with a float body that shuts of the airflow through the machine when the maximum liquid level is reached. You will then hear a noticeable change of the sound from the motor and notice that the suction power decreases. See item number 2 for emptying after wet pick-up. Remove the plug from the socket before emptying after dry pickup. check the filters and dustbag regularly. [. . . ] wind up the cord starting from the machine. The power cord can be wound up around the handle/hooks located on the motor top. Some variants have special storage places for accessories. THIS VACUUM CLEANER is designed, developed and rigorously tested to function efficiently and safely when properly maintained and used in accordance with the following instructions. [. . . ]