User manual NILFISK POWER

[. . . ] do not use the machine if it appears faulty. Have the machine inspected by an authorized service center if the machine has been dropped, damaged, left outdoors or has been exposed to water. No changes or modifications to the mechanical or electrical safety devices should be made. All repair must be carried out by an authorized service center. [. . . ] The tube is telescopic and can be adjusted to your height. Push the button in the middle of the tube to release the length adjustment lock. Release the hose connection from the suction inlet by pressing the locking mechanism and remove. Use of non-original dust bags or non-original filters can cause restricted air flow which may lead to machine overload. Use of accessories other than Nilfisk original dust bags and Nilfisk original filters will void the guarantee. b Changing the dust bag The fill level idicator of dust bag. When indicator is completly red the dust bag must be changed in order to prevent motor damage. Always use original dust bags from Nilfisk. Release the hose connection from the suction inlet by pressing the locking mechanism and then remove it. Open the lid to the dust container by lifting the opening button in front of/under the suction inlet. Insert the new dust bag by guiding the cardboard into the slots of the bag holder. Adjust the suction power by moving the sliding valve in appropriate position. Suction power is also adjusted using the slide control on top of the vacuum cleaner. One located on the underside to use when machine stands on the back, and the other on the back to use when the machine is standing on its wheels. G Thermal fuse The vacuum cleaner is fitted with a thermal fuse, which prevents it from overheating. If the thermal fuse blows, the vacuum cleaner stops and must cool down before it can be started again. Turn off the machine and unplug from the wall socket. Check that nothing blocks the air flow through bent tube, hose, tube, nozzle, dust bag or filters. Let the machine cool down, for at least 5-10 minutes. Plug in the machine again and start using the start/stop button. The machine will not start until it is sufficiently cool. If the machine does not start turn it off using the start/ stop button and unplug. [. . . ] The nozzles, filters, hoses, tubes and other accessories are covered twelve months due to manufacturing fault only and excludes wear and tear. The guarantee includes spare parts and labour costs, and covers manufacturing and material defects that may occur during normal domestic use. Service under the guarantee will only be performed if it can be proven that the defect occurred within the product's guarantee period (a correctly completed guarantee certificate or printed/stamped cash register receipt with date and product type) and on the condition that the vacuum cleaner was bought as a new product in Great Britain/Ireland/Australia/New Zealand and distributed by Nilfisk-Advance. In the event of the repair of defects, the customer must contact NilfiskAdvance to be directed to a service agent at the customers own expense. [. . . ]