User manual NILFISK PRO 2-15XTRA

[. . . ] High pressure washers shall not be used by children or untrained personnel. High pressure hoses, fittings and couplings are important for the safety of the machine. use only hoses , fittings and couplings recommended by Nilfisk. To ensure machine safety, use only original spare parts recommended by Nilfisk. [. . . ] Safety devices and their functioning The machine automa­tically stops when releasing the trigger. The machine will start again when reactivating the trigger. the spray handle features a locking device. When activated, the spray handle cannot be operated. the machine has an automatic self-resetting thermal protector. If the machine is overheated, the thermal protector will cut the power supply. In this case, wait for the machine to cool down. An integrated hydraulic safety valve protects the system from excessive pressure. Precautions The electric supply connection shall be made by a qualified electrician and comply with IEC 60364-1. It is recommended that the electric supply to this machine should include either a residual current device that will interrupt the supply if the leakage current to earth exceeds 30 mA for 30 ms or a device that will prove earth circuit. — Use motor start/delayed fuses with characteristic D according to IEC 947-2 or corresponding standards outside IEC. — If the supply cord is damaged, it must be replaced by an authorized Nilfisk distributor or similar qualified person in order to avoid a hazard. — No actions needed for adjusting machines marked with dual voltage and frequency. — Supervise children not to play with the machine. — The operator and any one in the immediate vicinity of the site for cleaning should take action to protect oneself from being struck by debris dislodged during operation. — Always wear safety boots, respiratory mask, ear protection, goggles and protective clothing during operation. — The high pressure generated by the machine is a particular source of danger. Hold the spray lance firmly with both hands. The spray lance is affected by a kickback force and a sudden torque during operation. — See PART 3:3 for the actual size of the kickback force. — During transportation: Position the machine horizontally on the backside and secure with straps. Within EU High pressure washers shall not be used nor maintained by children. [. . . ] If the machine refuses to start, stops, pulsates, pressure fluctuates, motor buzzes, fuse blows or no water comes out, check the trouble shooting diagram at our website www. Any repair should always be made in Nilfisk authorized workshop with original Nilfisk spare parts. B Anslutning till dricksvattenanslutning Högtryckstvättar bör inte anslutas till dricksvattennätet. 2016) Read the instructions before using the machine Kornmarksvej 1|DK-2605 Broendby|Denmark|Tel. [. . . ]